EQ-50 - Musical instrument Chord - Free user manual and instructions
Find the device manual for free EQ-50 Chord in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Graphic Equalizer Pedal |
| Model | EQ-50 |
| Brand | Chord |
| Dimensions (mm) | 114 x 64 x 48 |
| Weight (g) | 250 |
| Power Supply | 9V DC (center negative) |
| Current Draw | 30 mA |
| Frequency Bands | 10 bands (31.25 Hz – 16 kHz) |
| Equalization Range | ±12 dB per band |
| Input Impedance | 1 MΩ |
| Output Impedance | 100 Ω |
| Signal-to-Noise Ratio | >100 dB |
| Total Harmonic Distortion | <0.01% |
| Bypass Mode | True Bypass |
| LED Indicator | Power/Bypass status |
| Construction | Aluminum chassis |
| Input/Output | 1/4" TS jacks |
| Operating Temperature | 0°C to 40°C |
| Maintenance | Clean with a dry cloth; avoid solvents |
| Safety | Use only specified power supply |
| Spare Parts | Contact Chord support |
Frequently Asked Questions - EQ-50 Chord
How do I power the EQ-50?
Use a standard 9V DC power supply with center negative polarity. Current draw is 30 mA. A 9V battery can also be used.
How do I enable true bypass?
Simply press the footswitch to toggle between effect and bypass. The LED indicates the current state: lit for effect, off for bypass.
What do the EQ sliders do?
Each slider controls a specific frequency band. Slide up to boost (+12 dB) or down to cut (-12 dB). The center position is flat response.
Can I use the EQ-50 on bass guitar?
Yes, the EQ-50 is designed for both guitar and bass. It operates on instrument-level signals and has a wide frequency range suitable for bass.
Why is there no sound when engaged?
Check power supply and cables. Ensure the input and output jacks are fully inserted. Verify that the sliders are not all the way down.
How do I clean the EQ-50?
Wipe the exterior with a soft dry cloth. Use a mild cleaner for stubborn dirt. Avoid liquids entering the jacks or sliders.
Can I daisy-chain power with other pedals?
Yes, but ensure that the total current draw does not exceed the power supply's capacity. The EQ-50 uses about 30 mA.
What is the warranty period?
Chord offers a 2-year warranty from the date of purchase. Retain your receipt for warranty claims.
Are there any user-serviceable parts?
No. Do not open the pedal. Contact Chord support or an authorized repair center for service.
Can I replace the battery with a different type?
Only use a standard 9V alkaline battery. Rechargeable 9V batteries may work but will not charge inside the pedal.
User questions about EQ-50 Chord
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Musical instrument in PDF format for free! Find your manual EQ-50 - Chord and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EQ-50 by Chord.
USER MANUAL EQ-50 Chord
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Chord
Model : EQ-50
Category : Musical instrument