SPM 3005 - Receiver Chord - Free user manual and instructions
Find the device manual for free SPM 3005 Chord in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Chord |
| Model | SPM 3005 |
| Product Type | AV Receiver |
| Channels | 5.1 |
| Power Output | 100 W per channel (8 ohms) |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | Less than 0.05% |
| Signal-to-Noise Ratio | More than 90 dB |
| Inputs | 4 x HDMI, 2 x Optical, 2 x Coaxial, Analog Stereo (RCA) |
| Outputs | HDMI ARC, Subwoofer Pre-out, Speaker Terminals (5 pairs) |
| Tuner | FM/AM with presets |
| Bluetooth | Yes, for audio streaming |
| USB Playback | Yes (MP3, WMA, FLAC) |
| Dimensions (W x H x D) | 430 x 150 x 340 mm |
| Weight | 10 kg |
| Power Supply | AC 220-240 V, 50/60 Hz |
| Power Consumption | 500 W (max) |
| Standby Power | Less than 0.5 W |
| Remote Control | Included |
| Maintenance | Clean with a dry, soft cloth. Do not use liquids or solvents. |
| Safety Precautions | Do not expose to moisture. Ensure adequate ventilation. Unplug during storms. |
| Spare Parts | Contact authorized service center for replacement parts. |
| Warranty | 2 years |
Frequently Asked Questions - SPM 3005 Chord
How do I connect my TV to the Chord SPM 3005 receiver?
Use an HDMI cable from your TV's HDMI ARC port to the receiver's HDMI ARC output. Also ensure the TV's audio output is set to 'External Speakers' or 'Audio System'.
Can I play music via Bluetooth?
Yes, the SPM 3005 supports Bluetooth. Put the receiver in Bluetooth pairing mode and select it from your device's Bluetooth settings.
How many speakers can I connect?
The receiver supports a 5.1 system: front left/right, center, surround left/right, and one subwoofer.
What should I do if there is no sound?
Check that the correct input source is selected. Ensure speaker connections are secure and that the receiver is not muted. Verify the volume level and test with another device.
How do I reset the receiver to factory settings?
Press and hold the 'Pure Audio' button on the front panel while turning on the receiver. Release when 'Clear' appears on the display. Alternatively, consult the manual's reset procedure.
Is the receiver compatible with 4K video?
Yes, the HDMI inputs support 4K pass-through at 60Hz, including HDR and HDCP 2.2.
Can I use the receiver without a subwoofer?
Yes, you can configure the speaker setup as 'No Subwoofer' in the menu, and the bass will be redirected to the main speakers.
What is the maximum power output per channel?
The receiver delivers 100 watts per channel into 8 ohms, 20 Hz - 20 kHz, with 0.05% THD.
How do I clean the front panel?
Use a soft, dry microfiber cloth. Do not use any chemical cleaners or abrasive materials to avoid damaging the surface.
Does the receiver have a phono input for a turntable?
No, the SPM 3005 does not have a dedicated phono input. You will need an external phono preamp if connecting a turntable without a built-in preamp.
User questions about SPM 3005 Chord
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual SPM 3005 - Chord and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPM 3005 by Chord.
USER MANUAL SPM 3005 Chord
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Chord
Model : SPM 3005
Category : Receiver