Anni - Receiver Chord - Free user manual and instructions
Find the device manual for free Anni Chord in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Chord |
| Model | Anni |
| Product Type | Stereo Receiver / Headphone Amplifier |
| Dimensions (W x H x D) | 160 x 45 x 122 mm |
| Weight | 0.8 kg |
| Power Supply | External DC adapter (12V, 2A) |
| Inputs | RCA stereo (line level) |
| Outputs | 2x 3.5mm headphone jacks, RCA pre-out |
| Gain Switch | Low / High (0 dB / +10 dB) |
| Frequency Response | 20 Hz – 20 kHz ±0.1 dB |
| Total Harmonic Distortion | < 0.001% |
| Signal-to-Noise Ratio | > 118 dB |
| Headphone Impedance Range | 32 – 600 ohms |
| Output Power (per channel) | 200 mW into 32 ohms |
| Material | Aluminum chassis |
| Color | Silver or Black |
| Remote Control | No |
| Bluetooth | No |
| Maintenance | Clean with a soft, dry cloth |
| Safety | Do not expose to moisture or liquids |
| Spare Parts / Repairability | Not user-serviceable; contact Chord support |
Frequently Asked Questions - Anni Chord
How do I connect the Chord Anni to my audio source?
Use a stereo RCA cable to connect your source (e.g., CD player, DAC) to the RCA input jacks on the back of the Anni.
What power supply does the Anni need?
It requires an external DC power supply (12V, 2A) with a 2.1mm center-positive barrel connector. Use only the supplied adapter.
What headphones are compatible with the Anni?
The Anni works with most dynamic headphones from 32 to 600 ohms impedance. It delivers clean power for both low- and high-impedance models.
How do I adjust the gain on the Anni?
There is a gain switch on the front panel. Set to Low for sensitive headphones (low impedance) and High for harder-to-drive headphones (high impedance).
Can I use the Anni as a preamplifier?
Yes, the RCA pre-out allows you to connect to a power amplifier or active speakers. The volume control adjusts both headphone and pre-out simultaneously.
Does the Anni have a remote control?
No, the Anni does not include a remote control. Volume and input selection are manual.
How do I clean the Anni?
Use a soft, dry cloth to wipe the chassis. Avoid liquids or abrasive cleaners.
What is the warranty period?
Chord Electronics typically offers a 2-year warranty. Check with your dealer for specific terms.
Can I use the Anni with Bluetooth?
No, the Anni is an analog-only device. For wireless streaming, connect a Bluetooth receiver to its RCA inputs.
Where can I download the full manual?
The manual is available for free on notice-facile.com. You can download the PDF from the product page.
User questions about Anni Chord
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Anni - Chord and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Anni by Chord.
USER MANUAL Anni Chord
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Chord
Model : Anni
Category : Receiver