SuperServer SSG-620P-ACR16H - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer SSG-620P-ACR16H Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Supermicro |
| Model | SuperServer SSG-620P-ACR16H |
| Form Factor | 2U Rackmount |
| Processor Support | Dual Intel Xeon Scalable Processors (3rd Gen) |
| Memory Support | Up to 2TB DDR4 ECC RDIMM/LRDIMM, 16 slots |
| Drive Bays | 16 x 2.5" Hot-Swap SAS3/SATA3 |
| Expansion Slots | 7 PCIe 4.0 x8 or x16 |
| Power Supply | Dual Redundant 2000W Platinum Level |
| Dimensions (W x H x D) | 17.2 x 3.5 x 25.5 inches (437 x 89 x 648 mm) |
| Weight | 23 kg (50.7 lbs) |
| Cooling | 4 x 8cm Heavy Duty Fans with Optimal Fan Speed Control |
| Management | IPMI 2.0 with KVM and Dedicated LAN |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Warranty | 3 Years Limited |
Frequently Asked Questions - SuperServer SSG-620P-ACR16H Supermicro
What is the maximum storage capacity of the SSG-620P-ACR16H?
The server supports up to 16 hot-swap 2.5-inch SAS3/SATA3 drives, allowing for high-density storage configurations. Using 30TB SSDs, maximum raw capacity reaches 480TB.
How do I access the IPMI management interface?
Connect to the dedicated IPMI LAN port. The default IP is 192.168.1.100 with username 'admin' and password 'admin'. Change these immediately for security.
What type of processors does this server use?
It supports dual 3rd Gen Intel Xeon Scalable processors (Platinum, Gold, Silver) with LGA 4189 socket. Ensure TDP does not exceed 205W.
Can I use standard DDR4 memory in this server?
Yes, it supports ECC DDR4 RDIMM and LRDIMM at 3200MHz. Unregistered memory is not compatible. Install memory in pairs for best performance.
How many PCIe slots are available and what generation?
There are 7 PCIe 4.0 slots: 3 x8 and 4 x16. They support low-profile and full-height cards. The slots are configured for NVMe and network adapters.
How do I replace a failed power supply?
The power supplies are hot-swappable. Release the retention latch, pull out the failed unit, and insert a new one. Ensure the new PSU matches the wattage (2000W).
What RAID support is available?
The server supports software RAID via Intel VROC and hardware RAID through optional Broadcom SAS controllers. The onboard SATA controller supports RAID 0,1,5,10.
What is the recommended operating temperature range?
The safe operating range is 10°C to 35°C. Ensure proper airflow and avoid direct sunlight. The server can be stored at -40°C to 70°C.
How do I update the BIOS and BMC firmware?
Download the latest firmware from Supermicro's website. Use the SUM tool or IPMI web interface to update. Reboot after update and clear CMOS if issues arise.
What is the warranty period and how to claim?
Supermicro provides a 3-year limited warranty covering defects in materials and workmanship. Claim by contacting Supermicro support with proof of purchase and serial number.
User questions about SuperServer SSG-620P-ACR16H Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer SSG-620P-ACR16H - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer SSG-620P-ACR16H by Supermicro.
USER MANUAL SuperServer SSG-620P-ACR16H Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperServer SSG-620P-ACR16H
Category : Server