SuperServer SSG-121E-NE316R - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer SSG-121E-NE316R Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Server |
| Form Factor | 1U |
| Dimensions (W x H x D) | 17.2 x 1.7 x 25.6 inches (437 x 44 x 650 mm) |
| Weight | 25 lbs (11.3 kg) approximate |
| Processor Support | Intel Xeon Scalable (3rd Gen) |
| Memory Capacity | Up to 1TB DDR4 ECC RDIMM/LRDIMM |
| Drive Bays | 16 x 3.5" SAS/SATA hot-swap |
| Power Supply | Dual Redundant 800W Platinum Level |
| Networking | Dual 10GbE SFP+ |
| Expansion Slots | 1 x PCIe 4.0 x16 |
| Management | IPMI 2.0 with dedicated LAN |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Certifications | CE, FCC, UL |
| Maintenance | Front access to drives and fans, tool-less chassis |
| Safety Features | Overheat protection, redundant power, secure chassis |
| Spare Parts Availability | Direct from Supermicro or authorized distributors |
| Target Application | Storage, virtualization, enterprise workloads |
Frequently Asked Questions - SuperServer SSG-121E-NE316R Supermicro
How do I install the server in a rack?
Use the included rack mount kit. Attach the inner rails to the server and the outer rails to the rack posts, then slide the server in and secure with screws.
What type of memory does this server support?
It supports DDR4 ECC RDIMMs and LRDIMMs, up to 3200MHz, with a maximum capacity of 1TB.
How can I access the IPMI interface?
Connect to the dedicated IPMI LAN port. The default IP is 192.168.1.100 with username 'admin' and password 'admin'. Change these on first login.
What operating systems are compatible?
Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, Ubuntu Server, VMware vSphere.
How do I replace a failed hard drive?
The drives are hot-swap. Press the release button to open the handle, then slide out the drive tray. Insert a new drive with the same interface and capacity, then close the handle.
Can I use SATA drives instead of SAS?
Yes, the backplane supports both SAS and SATA drives in the same bay. Mixing is allowed but performance may vary.
What is the noise level?
Idle noise is around 35 dB; under load it can reach 55 dB. It is designed for data center environments.
How to perform a factory reset?
Press the reset button on the front panel for 10 seconds until the system reboots. For BIOS reset, use the CMOS clear jumper on the motherboard.
What warranty does this server come with?
Standard warranty is 3 years for parts and labor. Extended warranties are available for purchase.
Where can I download the latest BIOS?
Visit the Supermicro support page, enter the model SSG-121E-NE316R, and download the latest BIOS under the 'BIOS' section.
User questions about SuperServer SSG-121E-NE316R Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer SSG-121E-NE316R - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer SSG-121E-NE316R by Supermicro.
USER MANUAL SuperServer SSG-121E-NE316R Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperServer SSG-121E-NE316R
Category : Server