SuperStorage 2029P-E1CR24L - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperStorage 2029P-E1CR24L Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Server |
| Form Factor | 2U |
| Processor | Dual Intel Xeon Scalable (2nd Gen) up to 205W TDP |
| Memory | Up to 3TB DDR4 ECC 3DS LRDIMM, 24 DIMM slots |
| Drive Bays | 24 x 3.5" SAS/SATA hot-swap HDD/SSD |
| Storage Controller | Integrated SATA3 (6Gbps) controller; optional SAS3/HBA/RAID |
| Network | 2 x 10GbE RJ45, 2 x 1GbE RJ45 (depending on configuration) |
| Expansion Slots | 3 x PCIe 3.0 x16 low-profile, 1 x PCIe 3.0 x8 LP, 1 x internal |
| Power Supply | Redundant (1+1) 1600W Platinum/Certified |
| Dimensions (W x H x D) | 17.2 x 3.5 x 25.6 inches (437 x 89 x 650 mm) |
| Weight | 55 lbs (25 kg) fully loaded |
| Cooling | 6 x 40mm hot-swap heavy-duty fans |
| Management | IPMI 2.0 with virtual media over LAN and KVM-over-LAN |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Certifications | FCC, CE, UL, RoHS |
| Maintenance & Cleaning | Power off and disconnect before cleaning; use compressed air for dust removal |
| Safety | Operate in well-ventilated rack; avoid overloading circuits; use ESD protection |
| Spare Parts & Repairability | Field-replaceable units: PSU, fans, drives, memory, PCIe cards; contact Supermicro support |
| General Information | Designed for high-capacity storage and compute; supports Windows, Linux, VMware |
Frequently Asked Questions - SuperStorage 2029P-E1CR24L Supermicro
What is the maximum storage capacity of the SuperStorage 2029P-E1CR24L?
The server supports up to 24 hot-swap 3.5-inch SAS/SATA drives. With current 18TB HDDs, maximum raw capacity can reach 432 TB.
What processors are compatible with this server?
It supports dual Intel Xeon Scalable processors (2nd Gen) with a TDP up to 205W, including Platinum, Gold, Silver, and Bronze series.
How much memory can be installed?
The system has 24 DIMM slots supporting DDR4 ECC memory up to 3TB using 128GB LRDIMMs.
What are the power supply requirements?
It comes with redundant 1600W Platinum power supplies. Ensure your rack circuit can support at least 15-20 amps.
Does this server support NVMe drives?
The 24 drive bays are SAS/SATA only. However, NVMe support can be added via an optional PCIe NVMe controller or a dedicated NVMe backplane (not included by default).
What operating systems are officially supported?
Certified for Windows Server, Red Hat Enterprise Linux, Ubuntu, VMware ESXi, and other major distributions.
How do I access the IPMI remote management?
The dedicated IPMI port provides a web interface at the default IP (192.168.0.120). Use a browser to connect and log in with default credentials (admin/admin).
Can the server be rackmounted in a 2U space?
Yes, it is a 2U rackmount chassis and includes rails for standard 19-inch racks.
What is the noise level?
Under typical load, noise is around 55-60 dBA. The fans are variable speed and may be louder during startup.
How do I reset the BIOS to defaults?
During POST, press F2 to enter BIOS setup, navigate to 'Save & Exit', and select 'Restore Defaults'. Alternatively, clear the CMOS jumper on the motherboard.
User questions about SuperStorage 2029P-E1CR24L Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperStorage 2029P-E1CR24L - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperStorage 2029P-E1CR24L by Supermicro.
USER MANUAL SuperStorage 2029P-E1CR24L Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperStorage 2029P-E1CR24L
Category : Server