SuperServer 6028TP-HC0TR - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer 6028TP-HC0TR Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Supermicro |
| Model | SuperServer 6028TP-HC0TR |
| Product Type | Rackmount server |
| Form Factor | 2U rack enclosure |
| Dimensions | Approximately 3.5 x 17.2 x 30 inches (88.9 x 437 x 762 mm) |
| Weight | Approximately 35 kg (77 lb) depending on configuration |
| Processor Support | Intel Xeon E5-2600 v3 / v4 family |
| Chipset | Intel C612 |
| Memory Support | DDR4 ECC RDIMM / LRDIMM |
| Maximum Memory | High capacity per node; up to 2 TB with 16 DIMM slots |
| Drive Bays | Hot-swap SAS3 / SATA3 drive bays |
| Network Connectivity | Dual 10GbE ports per node |
| Expansion Slots | PCI Express 3.0 expansion slots |
| Power Supply | Redundant high-efficiency PSUs |
| Cooling | Hot-swappable PWM fans |
| Management | IPMI 2.0, SuperDoctor 5 |
| Operating System Support | Windows Server, Linux distributions, VMware ESXi |
| Main Functions | Virtualization, cloud computing, big data, enterprise applications |
| Maintenance | Keep air vents clear, periodically check fans and filters |
| Cleaning Procedure | Use compressed air for dust; do not use liquid cleaners |
| Safety Warning | Disconnect all power cables before opening the chassis; only qualified technicians should service the system |
| Spare Parts | Hot-swap PSU modules, fan modules, drive carriers, memory and CPU kits |
| Repairability | Tool-less cover release, color-coded connectors, field-serviceable components |
| General Information | High-density data center server with remote management and energy-efficient operation |
Frequently Asked Questions - SuperServer 6028TP-HC0TR Supermicro
How do I update the BIOS on the Supermicro 6028TP-HC0TR?
Download the latest BIOS from the Supermicro support website. Use the IPMI web interface or a UEFI flash utility to apply the update. Always keep the power stable during the flash process and reboot the system when finished.
How can I access the remote management interface?
Connect to the dedicated IPMI LAN port, then use the default IP or DHCP assignment to reach the BMC web interface. You can also use IPMI command-line tools for remote power control and hardware monitoring.
Which memory modules are compatible with this server?
Use DDR4 ECC RDIMM or LRDIMM memory modules from Supermicro's validated vendor list. Install them according to the memory population table in the manual to enable optimal channel interleaving and capacity.
How do I reset the BMC or administrator password?
Use the IPMICFG utility in a supported operating system to reset the BMC password, or set the BMC reset jumper on the motherboard. After the reset, log in with the default credentials and set a new password.
How do I install an operating system on this server?
First configure RAID or disk passthrough in the BIOS or RAID controller setup. Create a bootable USB installer, insert it, press F11 for the boot menu, and select the USB device. Follow the OS installer prompts.
How do I replace a failed power supply?
The server supports hot-swap power supplies. Locate the failed PSU by the amber LED, press the release tab, slide the unit out, and slide in a new PSU with the same wattage rating. The LED should turn green.
How do I check system temperature and fan speed?
Log into the IPMI web interface and view the Health or Sensor Readings page. Alternatively, use SuperDoctor 5 to monitor CPU temperatures, fan speeds, and voltages in a graphical dashboard.
Can I use SATA hard drives in the SAS3/SATA3 drive bays?
Yes, the SAS3/SATA3 backplane supports both SAS and SATA drives. If you use SAS drives, ensure the appropriate controller is installed, as onboard SATA ports may not detect SAS devices.
How do I perform a factory reset of the server settings?
Clear the CMOS using the motherboard jumper or the BIOS option, then enter BIOS setup and select Load Optimized Defaults. Save changes and reboot to restore the factory configuration.
How do I troubleshoot a no-power condition?
Check the AC power cables, PSU LEDs, and the power button cable connection to the motherboard. If the standby LED is off, try replacing the power supply. If the system still does not power on, inspect the motherboard for short circuits or faulty components.
User questions about SuperServer 6028TP-HC0TR Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer 6028TP-HC0TR - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer 6028TP-HC0TR by Supermicro.
USER MANUAL SuperServer 6028TP-HC0TR Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperServer 6028TP-HC0TR
Category : Server