SuperServer E100-9W-IA-C - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer E100-9W-IA-C Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server (Mini Tower) |
| Brand | Supermicro |
| Model | SuperServer E100-9W-IA-C |
| Dimensions (H x W x D) | 8.5 x 7.2 x 7.8 inches (216 x 183 x 198 mm) |
| Weight | 8.5 lbs (3.9 kg) |
| Power Supply | 60W AC-DC Adapter (Input: 100-240V, Output: 12V DC) |
| Processor | Intel Atom C3758 (8 Cores, 2.2 GHz, 16 MB Cache) |
| Memory | Up to 32GB DDR4 ECC SODIMM (2 slots, max 16GB per module) |
| Storage | 1x M.2 NVMe SSD (2280), 2x SATA3 ports |
| Network | 2x Gigabit Ethernet (Intel i210) |
| Expansion Slots | 1x M.2 2280, 1x Mini-PCIe |
| Cooling | Passive heatsink (fanless design, optional external fan) |
| Management | IPMI 2.0 with dedicated LAN connection |
| Security | TPM 2.0 header, chassis intrusion detection |
| Operating Systems Supported | Windows Server 2016/2019, Linux (CentOS, Ubuntu, Debian) |
| Warranty | 3 years limited |
| Maintenance | Easy access to RAM and M.2 SSD via top cover |
| Cleaning | Use compressed air to clean dust from vents and heatsink |
| Repairability | Modular design: RAM and SSD are replaceable; CPU is soldered |
| Environmental | Operating temperature: 0°C to 40°C, Humidity: 10% to 90% non-condensing |
| Certifications | FCC, CE, RoHS |
Frequently Asked Questions - SuperServer E100-9W-IA-C Supermicro
How do I install an operating system on the SuperServer E100-9W-IA-C?
To install an OS, first connect a monitor and keyboard to the server. Insert a bootable USB drive with the OS installer. Power on and press F11 to enter the boot menu. Select the USB drive and follow the installation prompts. Ensure the BIOS is set to UEFI mode for modern OS.
What is the maximum memory capacity?
The server supports up to 32GB of DDR4 ECC memory using two 16GB SODIMM modules. Memory speed depends on the processor, typically up to 2400 MT/s.
How can I access the IPMI remote management interface?
Connect a network cable to the dedicated IPMI LAN port. The default IP address is 192.168.0.2. Open a web browser and enter the IP. Use username ADMIN and password ADMIN (change immediately). From there, you can monitor system health and remotely control the server.
How do I replace the M.2 SSD?
Power off the server and disconnect all cables. Remove the top cover by unscrewing the thumb screws. Locate the M.2 slot on the motherboard. Gently remove the existing SSD by pulling it out. Insert the new M.2 SSD at a 30-degree angle and press down until it clicks. Secure with the screw. Replace the cover and reconnect power.
What power adapter is compatible with this server?
The server uses a 60W AC-DC power adapter with a 12V DC output. The barrel jack size is 5.5mm outer diameter, 2.5mm inner diameter. Ensure the adapter is certified and provides at least 5A current.
What is the default BIOS password?
The default BIOS password is admin. If it has been changed and forgotten, you can clear the CMOS by moving the jumper on the motherboard or removing the CMOS battery for a few minutes.
How can I reset the server to factory settings?
To factory reset, enter the BIOS by pressing Del during boot. Navigate to the Save & Exit tab and select Restore Defaults. Confirm and exit. Alternatively, clear the CMOS using the jumper method.
How do I check the system temperature?
You can check the temperature via IPMI interface under the System Health section. Alternatively, in the BIOS, go to Hardware Monitor. For real-time monitoring, use Supermicro's SuperDoctor software or third-party tools like lm-sensors on Linux.
How do I update the firmware?
Download the latest firmware (BIOS, BMC) from Supermicro's support page for your model. Use the SUMC (Supermicro Update Manager) tool or flash via IPMI by uploading the firmware file in the Maintenance section. Ensure the server is on a UPS to prevent power loss during update.
Can I mount the server in a rack?
The E100-9W-IA-C is a mini tower and does not include rack mount brackets. However, you can place it on a shelf or use a third-party rack shelf. It is not designed for direct rack mounting without optional accessories.
User questions about SuperServer E100-9W-IA-C Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer E100-9W-IA-C - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer E100-9W-IA-C by Supermicro.
USER MANUAL SuperServer E100-9W-IA-C Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperServer E100-9W-IA-C
Category : Server