Supermicro

SuperServer SYS-110D-4C-FRDN8TP - Server Supermicro - Free user manual and instructions

Find the device manual for free SuperServer SYS-110D-4C-FRDN8TP Supermicro in PDF.

📄 1 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Supermicro SuperServer SYS-110D-4C-FRDN8TP - page 1
1 / 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Server
Brand Supermicro
Model SuperServer SYS-110D-4C-FRDN8TP
Form Factor 1U Rackmount
Processor Intel Xeon D-1541 (8 cores, 2.1 GHz) or similar
Memory 4 x DDR4 ECC DIMM slots, up to 128 GB
Storage 2 x 2.5" SATA SSD/HDD bays
Networking 4 x 10GBASE-T, 4 x 25GbE SFP28, dedicated IPMI
Expansion Slots 1 x M.2 (SATA/NVMe), 1 x PCIe 3.0 x16
Power Supply 200W AC-DC, single or redundant optional
Dimensions (W x D x H) 437 x 400 x 43 mm
Weight Approximately 6.8 kg
Operating Temperature 0°C to 40°C
Cooling 4 x 40mm fans, PWM control
Management IPMI 2.0 with dedicated LAN
Mounting Kit Rack rails included
Maintenance Tool-less access to drives, memory, and fans
Safety UL, CE, FCC Class A certified
Spare Parts Available through Supermicro or authorized resellers

Frequently Asked Questions - SuperServer SYS-110D-4C-FRDN8TP Supermicro

What type of processor does the SuperServer SYS-110D-4C-FRDN8TP use?
It uses an Intel Xeon D-1500 series processor, typically the D-1541 with 8 cores and 2.1 GHz base frequency.
How much memory can be installed?
The server supports up to 128 GB of DDR4 ECC memory across 4 DIMM slots.
What are the storage options?
It has two 2.5-inch SATA drive bays and one M.2 slot for SATA or NVMe SSDs.
What network interfaces are available?
The server includes 4x 10GBASE-T RJ45 ports and 4x 25GbE SFP28 ports for high-speed networking.
How do I access the IPMI for remote management?
Connect to the dedicated IPMI LAN port and use the default IP address 192.168.1.10 with username 'admin' and password 'admin'.
Can I install a PCIe expansion card?
Yes, there is one PCIe 3.0 x16 slot available for a low-profile card.
What is the form factor and mounting?
The server is a 1U rackmount unit and comes with rack rails for installation.
How do I replace a failed fan?
Fans are hot-swappable; remove the top cover and gently pull the fan module out, then insert a new one.
What is the power consumption?
Typical power consumption is around 80-120W depending on load, with a 200W power supply.
How often should I clean the dust filters?
It is recommended to check and clean the air filters every 3 months to ensure proper cooling.

User questions about SuperServer SYS-110D-4C-FRDN8TP Supermicro

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Server in PDF format for free! Find your manual SuperServer SYS-110D-4C-FRDN8TP - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer SYS-110D-4C-FRDN8TP by Supermicro.

USER MANUAL SuperServer SYS-110D-4C-FRDN8TP Supermicro

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Supermicro

Model : SuperServer SYS-110D-4C-FRDN8TP

Category : Server