SuperServer 2028TP-DC0TR - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer 2028TP-DC0TR Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Server |
| Form Factor | 2U |
| Dimensions (W x D x H) | 17.2 x 25.5 x 3.5 inches (437 x 648 x 89 mm) |
| Weight | Approximately 35 lbs (15.9 kg) |
| Processor Support | Dual Intel Xeon E5-2600 v3/v4 |
| Chipset | Intel C612 PCH |
| Memory | 16x DIMM slots, DDR4 ECC RDIMM/LRDIMM, up to 1TB |
| Storage | Up to 10x 2.5" hot-swap SATA/SAS drive bays |
| RAID Support | Software RAID 0,1,5,10; optional hardware RAID |
| Networking | Dual 10GBase-T and dedicated IPMI LAN |
| Power Supply | Dual redundant 750W (or 1000W) Platinum level |
| Management | IPMI 2.0 with SuperDoctor 5, KVM over IP |
| Cooling | 4x hot-swappable system fans |
| Expansion Slots | 2x PCIe 3.0 x16 (riser cards), 1x PCIe 3.0 x8 |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Maintenance & Cleaning | Use compressed air for dust removal; avoid liquids |
| Safety Notices | Operate only with chassis closed; ESD precautions required |
| Spare Parts & Repairability | FRU: fans, PSUs, backplane, riser cards; user-replaceable |
| General Information | Designed for data center; supports virtualization and HPC |
Frequently Asked Questions - SuperServer 2028TP-DC0TR Supermicro
What processors are supported by the SuperServer 2028TP-DC0TR?
This server supports dual Intel Xeon E5-2600 v3/v4 processors. Ensure your BIOS is updated for compatibility.
How do I access the IPMI management interface?
The IPMI interface is accessible via the dedicated LAN port. The default IP is 192.168.0.2. Use a web browser and log in with default credentials ADMIN/ADMIN.
What is the maximum memory capacity?
With 16 DDR4 DIMM slots, the server supports up to 1TB using 64GB LRDIMMs. Use only registered ECC memory.
Can I use both SATA and SAS drives?
Yes, the backplane supports both SATA and SAS drives via an optional SAS controller. Mixing drive types is possible but may limit RAID configurations.
How do I reset the BIOS settings?
You can reset the BIOS by clearing the CMOS jumper on the motherboard (JBT1) or removing the CMOS battery for 30 seconds. Refer to the manual for exact location.
Is the power supply hot-swappable?
Yes, the server features dual redundant hot-swap power supplies. Replace one without shutting down the system.
What RAID levels are supported without a hardware card?
Using the Intel C612 chipset, software RAID supports RAID 0, 1, 5, and 10. For advanced RAID levels, install a optional RAID controller.
How can I update the BIOS?
Download the latest BIOS from Supermicro's support page. Use the Flash Utility via a DOS bootable USB or the IPMI Firmware Update tool.
What type of cooling does the chassis use?
The 2U chassis contains 4 hot-swappable fans with redundant airflow. Ensure all fan modules are installed for proper cooling.
Where can I find spare parts?
Spare parts such as fans, power supplies, and riser cards are available from Supermicro or authorized distributors. Use the product page for part numbers.
User questions about SuperServer 2028TP-DC0TR Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer 2028TP-DC0TR - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer 2028TP-DC0TR by Supermicro.
USER MANUAL SuperServer 2028TP-DC0TR Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperServer 2028TP-DC0TR
Category : Server