SuperServer 2029TP-HC0R - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer 2029TP-HC0R Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Form Factor | 2U Rackmount |
| Processor Support | Dual Intel Xeon Scalable (LGA 3647) |
| Memory Support | Up to 3TB DDR4 ECC Registered (24 DIMM slots) |
| Storage | Up to 8x 2.5" hot-swap SATA/SAS drive bays |
| Network | Dual 10GbE (Intel X557-AT2) + Dedicated IPMI |
| Expansion Slots | 2x PCIe 3.0 x16 (low-profile) + 1x PCIe 3.0 x8 |
| Power Supply | Redundant 1600W Platinum (93% efficiency) |
| Dimensions (H x W x D) | 3.5" x 17.2" x 30.5" (88.9 x 437 x 775 mm) |
| Weight | Approx. 35 lbs (15.9 kg) without drives |
| Management | IPMI 2.0 with dedicated LAN port |
| Security | TPM 2.0 module support (optional) |
| Cooling | 4x hot-swap 40mm fans with dual rotor |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Compliance | FCC, CE, UL, RoHS |
| Reparability | Hot-swap drives, modular fans and PSUs |
| Maintenance | No special cleaning required; vacuum dust periodically |
Frequently Asked Questions - SuperServer 2029TP-HC0R Supermicro
How do I install drives in the SuperServer 2029TP-HC0R?
Open the front bezel (if equipped). Insert 2.5-inch drives into the hot-swap trays, secure with screws, then slide into empty bays until the handle latches. Close the bezel.
What processors are compatible?
It supports dual Intel Xeon Scalable processors (Skylake-SP and Cascade Lake-SP) in LGA 3647 socket. Refer to the manual for specific SKUs.
How do I reset the IPMI password?
Connect to the IPMI web interface. Use the default credentials (admin/admin) or the one set. To reset via the front panel, press and hold the IPMI reset button for 4 seconds until the status LED blinks.
What is the maximum memory capacity?
Up to 3TB of DDR4 ECC Registered memory across 24 DIMM slots (6 per CPU). Supports both RDIMM and LRDIMM modules.
Can I use SATA and SAS drives together?
The backplane supports both SATA and SAS drives, but you need a compatible controller. SATA drives work with the onboard SATA controller, while SAS requires an add-in SAS HBA.
How do I configure RAID?
This server typically includes an onboard software RAID (Intel VROC) for SATA drives. For hardware RAID, install a compatible PCIe RAID controller. Configure via the BIOS or the controller utility.
What type of power supply does it use?
Two redundant 1600W Platinum power supplies (hot-swap). They accept 100-240V AC input.
How do I access the BIOS?
During boot, press the DEL or F2 key on the keyboard when prompted (attached via KVM or local console).
The server overheats; what should I check?
Ensure the ambient temperature is below 35°C. Check if all fans are spinning. Clean air filters and verify that nothing blocks airflow. Check the IPMI log for fan failure alerts.
Where can I find the latest firmware updates?
Visit Supermicro’s support site and search for the model 2029TP-HC0R. Download BIOS, BMC/IPMI, and firmware updates. Always follow the update procedure in the manual.
User questions about SuperServer 2029TP-HC0R Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer 2029TP-HC0R - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer 2029TP-HC0R by Supermicro.
USER MANUAL SuperServer 2029TP-HC0R Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperServer 2029TP-HC0R
Category : Server