SuperServer 2029U-E1CR25M - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer 2029U-E1CR25M Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Supermicro |
| Model | SuperServer 2029U-E1CR25M |
| Form Factor | 2U Rackmount |
| Processor | Dual Intel Xeon Scalable (Socket LGA 3647) |
| Memory Capacity | Up to 3TB DDR4 ECC Registered (24 DIMM slots) |
| Storage | 25x 2.5-inch hot-swap SAS3/SATA3 bays |
| Expansion Slots | 2x PCIe 3.0 x16, 2x PCIe 3.0 x8 |
| Networking | Dual 10GbE (Intel X710) + Dual 1GbE (I350) |
| Power Supply | Redundant 1600W Platinum (1+1) |
| Dimensions (H x W x D) | 3.47 x 17.2 x 25.5 inches (88 x 437 x 648 mm) |
| Weight | Approx. 35 lbs (15.9 kg) |
| Cooling | 4x Hot-swap 8cm PWM fans |
| Management | IPMI 2.0 with dedicated LAN |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Humidity | 8% to 90% non-condensing |
| Security Features | TPM 2.0, Secure Boot, Chassis Intrusion Switch |
| Maintenance Access | Tool-less top cover, hot-swap components |
| Supported OS | Windows Server, Linux, VMware ESXi |
| Warranty | Standard 3-year limited warranty |
Frequently Asked Questions - SuperServer 2029U-E1CR25M Supermicro
How do I access the IPMI remote management interface?
Connect the dedicated IPMI LAN port to your network. The default IP is 192.168.1.1. Use a web browser to access https://. Default credentials are ADMIN/ADMIN (case sensitive). Change them immediately for security.
What type of memory is supported?
The server supports DDR4 ECC Registered (RDIMM) and Load Reduced (LRDIMM) memory. Maximum capacity is 3TB using 128GB modules. Use only Supermicro validated memory modules.
How to replace a failed hard drive?
The drives are hot-swap. Locate the failed drive (LED indicator amber). Press the release button, pull out the drive tray, replace the drive, and insert the tray. The RAID controller will automatically rebuild.
Can I install a GPU card?
Yes, the server supports up to two double-width GPUs (e.g., NVIDIA V100) in the PCIe slots. Ensure adequate power and cooling.
What is the default RAID configuration?
The onboard SATA controller supports RAID 0,1,5,10. For hardware RAID, an optional controller (e.g., Broadcom 3108) can be installed in the dedicated storage slot.
How to reset the IPMI password?
You can reset via the motherboard Jumper JPG1 (clear CMOS) or use the IPMI command 'ipmitool user set password 2 newpassword' from the system console.
What is the maximum power consumption?
Under full load with dual high-end CPUs and many drives, the maximum draw is approximately 1200W. The redundant power supplies provide 1+1 redundancy.
How to install the server in a rack?
Use the included rack rails. Attach inner rails to the server and outer rails to the rack. Slide the server in and secure with screws. Ensure proper ventilation.
What are the BIOS settings for virtualization?
In BIOS, under Advanced > CPU Configuration, enable 'Intel Virtualization Technology' (VT-x) and 'VT-d'. Also enable 'SR-IOV' if using virtual functions.
How to update the firmware?
Download the latest firmware from Supermicro's website. Use the BMC web interface (Maintenance > Firmware Update) or the SUM tool via IPMI. Always backup current settings first.
User questions about SuperServer 2029U-E1CR25M Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer 2029U-E1CR25M - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer 2029U-E1CR25M by Supermicro.
USER MANUAL SuperServer 2029U-E1CR25M Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperServer 2029U-E1CR25M
Category : Server