SuperServer 1018R-WR - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer 1018R-WR Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Supermicro |
| Model | SuperServer 1018R-WR |
| Form Factor | 1U Rackmount |
| Dimensions (W x H x D) | 17.2 x 1.7 x 25.6 inches (437 x 43 x 650 mm) |
| Weight | 35 lbs (15.9 kg) approximate |
| Power Supply | 750W Redundant Platinum Level (optional 1000W) |
| Processor Support | Intel Xeon E5-2600 v3/v4 series, up to 160W TDP |
| Memory | 16 DIMM slots, DDR4 ECC, up to 512GB |
| Storage | 8 x 2.5" SAS3/SATA3 hot-swap drive bays |
| Expansion Slots | 1 x PCI-E 3.0 x16, 1 x PCI-E 3.0 x8 (low profile) |
| Networking | 2 x 1GbE Intel I350, 1 x dedicated IPMI LAN |
| Management | IPMI 2.0 with SuperDoctor 5, optional TPM |
| Operating Temperature | 50°F to 95°F (10°C to 35°C) |
| Included Accessories | Rack mount kit, power cables, documentation CD |
| Safety Certifications | UL, CE, FCC Class A, RoHS |
| Maintenance | Tool-less access to fans, drives, and memory |
| Cleaning | Vacuum dust from air intakes; avoid liquids |
| Spare Parts | Power supplies, fans, drive carriers, rails available |
| Repairability | Modular design with replaceable components; CRUs labeled |
Frequently Asked Questions - SuperServer 1018R-WR Supermicro
How do I install the server in a rack?
Use the included rack mount kit. Position the server on the rails, slide it in, and secure the front ears with screws. Ensure adequate ventilation.
What type of memory is compatible?
DDR4 ECC Registered DIMMs (RDIMM) or Load Reduced DIMMs (LRDIMM) with speeds up to 2400MHz. Mixing different types is not recommended.
How to reset the IPMI password?
Press and hold the IPMI reset button on the motherboard for 10 seconds while the system is powered on. Default credentials are ADMIN/ADMIN after reset.
Can I use SATA drives in the SAS slots?
Yes, the backplane supports both SAS3 and SATA3 drives. However, mixing SAS and SATA in the same RAID array is not supported.
How to replace a failed power supply?
The power supplies are hot-swappable. Pull the release lever and slide out the faulty unit. Insert the new one until it clicks. No tools required.
What is the supported processor TDP?
The system supports processors with TDP up to 160W. For best performance, use Intel Xeon E5-2697A v4 or similar.
How do I access the BIOS setup?
Press the Del key during boot. If using IPMI, press F2 during remote console connection.
What RAID options are available?
The server supports software RAID via the Intel C612 chipset (RAID 0/1/10) or optional hardware RAID card installed in the PCIe slot.
How can I update the firmware?
Download the latest firmware from Supermicro's website. Use the Supermicro Update Manager (SUM) tool or bootable ISO. Always backup settings first.
What should I do if the server overheats?
Check that all fans are spinning and air filters are clean. Ensure ambient temperature is below 35°C. If problem persists, contact Supermicro support.
User questions about SuperServer 1018R-WR Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer 1018R-WR - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer 1018R-WR by Supermicro.
USER MANUAL SuperServer 1018R-WR Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperServer 1018R-WR
Category : Server