FL206 - Measurement Aerospace Logic - Free user manual and instructions
Find the device manual for free FL206 Aerospace Logic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Measurement Device (Multimeter/Frequency Counter) |
| Brand | Aerospace Logic |
| Model | FL206 |
| Dimensions (W x H x D) | 180 x 90 x 40 mm |
| Weight | 350 g |
| Power Supply | 9V battery (e.g., 6LR61) or optional AC adapter |
| Display | LCD, 5 digits, with backlight |
| Measurement Functions | AC/DC Voltage, AC/DC Current, Resistance, Frequency, Capacitance, Diode test, Continuity |
| Accuracy (DC Voltage) | ±0.5% |
| Safety Rating | CAT II 600V, Overload protection |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Accessories Included | Test leads, user manual, 9V battery |
| Warranty | 1 year limited warranty |
| Cleaning | Wipe with a dry, soft cloth; do not use solvents |
| Compliance | CE, RoHS |
Frequently Asked Questions - FL206 Aerospace Logic
How do I measure DC voltage with the FL206?
Set the rotary switch to V (DC) and connect the test leads: black to COM, red to V/Ω. Touch the probes to the circuit and read the display.
What is the maximum current the FL206 can measure?
The FL206 can measure up to 10A (with a separate 10A input) for up to 30 seconds. For currents above 10A, use a clamp accessory.
How do I replace the battery?
Remove the battery cover on the back using a screwdriver. Replace the old 9V battery with a new one, ensuring correct polarity. Reattach the cover.
Can I measure frequency with the FL206?
Yes, set the rotary switch to Hz position. Connect the test leads and apply the signal. The meter displays the frequency in Hz.
What does the 'OL' reading mean?
OL stands for Overload, indicating that the input exceeds the selected range. Switch to a higher range to get a valid reading.
Is the FL206 safe for use on industrial circuits?
The FL206 has a CAT II 600V safety rating, making it suitable for measurements on circuits supplied by a standard mains outlet. For industrial environments, a higher CAT rating is recommended.
How do I perform a continuity test?
Set the rotary switch to the continuity symbol (usually a diode/sound icon). Connect the leads; if continuity exists (resistance < 50Ω), the meter beeps.
Why is the display not turning on?
Check if the battery is installed correctly and has sufficient charge. Also ensure the rotary switch is not in the OFF position. If still no display, replace the battery.
Can I measure capacitance with the FL206?
Yes, set the rotary switch to the capacitance range. Discharge the capacitor fully before connecting. Connect the leads and read the value.
How do I clean the FL206?
Use a dry, soft cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. For the test leads, clean with a damp cloth and mild soap if needed.
User questions about FL206 Aerospace Logic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual FL206 - Aerospace Logic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FL206 by Aerospace Logic.
USER MANUAL FL206 Aerospace Logic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Aerospace Logic
Model : FL206
Category : Measurement