75120 - Compressor Craftsman - Free user manual and instructions
Find the device manual for free 75120 Craftsman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Compressor |
| Brand | Craftsman |
| Model | 75120 |
| Power Source | Electric (120V) |
| Tank Capacity | 6 Gallons |
| Maximum Pressure | 150 PSI |
| Air Flow (CFM) | 2.6 CFM @ 90 PSI |
| Voltage | 120V / 60Hz |
| Amperage | 12 Amps |
| Dimensions (L x W x H) | 18 x 12 x 15 inches |
| Weight | 35 lbs |
| Noise Level | 75 dB |
| Oil Type | SAE 30 Non-Detergent |
| Safety Features | Thermal overload, pressure relief valve |
| Maintenance | Drain tank daily, check oil weekly |
| Warranty | 1 Year Limited |
| Included Accessories | Quick coupler, air chuck, manual |
| Recommended Use | Tire inflation, brad nailers, staplers |
| Certifications | ETL Listed |
Frequently Asked Questions - 75120 Craftsman
How do I change the oil in my Craftsman 75120 compressor?
To change the oil, first unplug the compressor and drain the tank. Locate the oil drain plug at the bottom of the pump. Remove the plug and let the old oil drain into a container. Replace the plug and fill with SAE 30 non-detergent oil to the proper level.
What is the maximum pressure setting for the 75120 compressor?
The maximum pressure is 150 PSI. The pressure switch is pre-set to shut off at this value to prevent over-pressurization.
How do I adjust the pressure regulator?
Turn the regulator knob clockwise to increase pressure and counterclockwise to decrease. Monitor the outlet pressure gauge to set your desired pressure, typically between 90-120 PSI for most tools.
Why is my compressor not building pressure?
Check for leaks in hoses or connections, ensure the tank drain valve is closed, and verify the intake filter is clean. Also, confirm the pressure switch is functioning and the check valve isn't stuck.
Can I use extension cords with this compressor?
Yes, but use a 12-gauge or heavier cord that is no longer than 50 feet. A longer or lighter cord can cause voltage drop and motor damage.
How often should I drain the tank?
Drain the tank daily after use to prevent moisture buildup and rust. Open the drain valve at the bottom of the tank and let water out until only air escapes.
What type of oil should I use?
Use SAE 30 non-detergent oil specifically designed for air compressors. Do not use synthetic or multi-viscosity oils as they may damage the pump.
Is the Craftsman 75120 oil-free?
No, this model requires oil lubrication. Check the oil level before each use and maintain it between the low and high marks on the sight glass.
How loud is this compressor?
The noise level is approximately 75 dB, similar to a vacuum cleaner. Use ear protection if operating for extended periods.
Where can I find replacement parts for my Craftsman 75120?
Replacement parts are available through Craftsman's website or authorized dealers. Common parts include filters, pressure switches, and regulator knobs.
User questions about 75120 Craftsman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual 75120 - Craftsman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 75120 by Craftsman.
USER MANUAL 75120 Craftsman
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Craftsman
Model : 75120
Category : Compressor