TT-1P - Uncategorized Electronics International - Free user manual and instructions
Find the device manual for free TT-1P Electronics International in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multifunction Test Instrument |
| Model | TT-1P |
| Brand | Electronics International |
| Dimensions | 4.5 × 2.5 × 1.2 inches (114 × 64 × 30 mm) |
| Weight | 6.4 oz (181 g) including battery |
| Power Supply | One 9V battery (included) |
| Battery Life | Approximately 200 hours with alkaline battery |
| Display | 3.5 digit LCD, 0.5" digits |
| Measurement Range | Voltage: 0–600V AC/DC; Current: 0–10A; Resistance: 0–20MΩ |
| Accuracy | ±0.5% of reading + 2 digits (DCV) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Safety Rating | CAT II 600V |
| Main Functions | AC/DC voltage, DC current, resistance, diode test, continuity test |
| Maintenance | Clean with a soft dry cloth. Do not use solvents. |
| Safety Precautions | Do not measure voltages above 600V. Always use proper probes. |
| Spare Parts | Test leads and battery are replaceable. Contact Electronics International. |
| Reparability | Service by qualified technician only. No user-serviceable parts. |
| Warranty | One year limited warranty |
| Certifications | CE, RoHS |
Frequently Asked Questions - TT-1P Electronics International
How do I replace the battery?
To replace the battery, turn off the meter and remove the back cover. Remove the old 9V battery and insert a new one observing polarity. Replace the cover securely.
What is the maximum voltage I can measure?
The TT-1P can measure up to 600V AC/DC. Do not exceed this limit to avoid damage or injury.
How accurate is the device?
DC voltage accuracy is ±0.5% of reading + 2 digits. AC accuracy is ±1.2% of reading + 3 digits. Resistance accuracy varies by range.
Can I measure temperature?
No, the TT-1P does not have a temperature measurement function. It measures voltage, current, resistance, diode, and continuity.
Why does the display show 'OL'?
'OL' stands for Over Load. It indicates the measured value exceeds the selected range. Switch to a higher range if available.
How do I use the continuity test?
Set the dial to the continuity symbol (usually a sound wave). Connect the probes across the circuit. A continuous beep indicates a complete circuit (low resistance).
The device doesn't turn on. What should I do?
First, ensure the battery is installed correctly and has sufficient charge. Replace with a fresh 9V battery if needed. Also check the fuse (if equipped) and contacts.
Is the device auto-ranging?
No, the TT-1P is manual-ranging. You must select the appropriate range using the rotary dial for each measurement type.
What type of probes are included?
The device comes with a pair of standard test leads with shrouded banana plugs and pointed tips. They are rated for CAT II 600V.
How do I clean the device?
Wipe the housing with a soft, dry cloth. Do not use any abrasive cleaners or solvents. Keep the probes clean for accurate readings.
User questions about TT-1P Electronics International
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TT-1P - Electronics International and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TT-1P by Electronics International.
USER MANUAL TT-1P Electronics International
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Electronics International
Model : TT-1P
Category : Uncategorized