E-2 - Uncategorized Electronics International - Free user manual and instructions
Find the device manual for free E-2 Electronics International in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Electronics International |
| Model | E-2 |
| Product Type | Electronic Timer |
| Dimensions (W x H x D) | 120 mm x 80 mm x 30 mm |
| Weight | 150 g |
| Power Supply | 9V battery (included) or AC adapter (optional) |
| Display Type | LCD digital display |
| Number of Programs | 8 programmable timer settings |
| Countdown Range | 1 minute to 99 hours 59 minutes |
| Output Type | Relay contact, 10A at 250VAC |
| Main Functions | Programmable timer, countdown, cycle mode, manual override |
| Backup Memory | Retains settings during battery change |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -10°C to 60°C |
| Relative Humidity | Up to 80% non-condensing |
| Material | ABS plastic housing |
| Mounting | Desktop or wall mount (screws not included) |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids or solvents. |
| Safety | Keep away from water and moisture. Do not disassemble. |
| Spare Parts | Battery cover, replacement battery, optional AC adapter |
| Reparability | Battery user-replaceable. Other repairs only by authorized service. |
| Warranty | 2 years from date of purchase |
| Certifications | CE, RoHS |
Frequently Asked Questions - E-2 Electronics International
How do I set the timer on the E-2?
Press the SET button to enter programming mode. Use the + and - buttons to adjust hours and minutes, then press SET again to confirm. Refer to the manual for detailed steps.
What type of battery does the E-2 use?
The E-2 uses a standard 9V alkaline battery. It is included in the package and can be replaced by opening the battery compartment.
Can I use the E-2 with an AC adapter?
Yes, the E-2 supports an optional AC adapter (9V DC, center positive). This allows continuous operation without battery drain.
How many timer programs can I store?
The E-2 can store up to 8 different timer programs. Each program has independent on/off times and can be assigned to specific days.
What is the maximum load for the relay output?
The relay output can handle a maximum load of 10A at 250VAC. For inductive loads, use a snubber or contact factory.
How do I reset the E-2 to factory settings?
Press and hold the RESET button (located on the back) for 5 seconds using a paper clip. All settings will be cleared.
The display is blank. What should I do?
First, check the battery or AC adapter connection. If using battery, replace it with a new 9V battery. If still blank, press the RESET button.
Is the E-2 waterproof?
No, the E-2 is not waterproof. Keep it away from water and high humidity. Use indoors only.
Can I mount the E-2 on a wall?
Yes, the E-2 has keyhole slots on the back for wall mounting. Use two screws (not included) with appropriate anchors.
How long does the battery last?
With normal use, the battery lasts approximately 6 months. To extend battery life, use the AC adapter when possible.
User questions about E-2 Electronics International
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual E-2 - Electronics International and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E-2 by Electronics International.
USER MANUAL E-2 Electronics International
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Electronics International
Model : E-2
Category : Uncategorized