E-4 - Uncategorized Electronics International - Free user manual and instructions
Find the device manual for free E-4 Electronics International in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic Control or Measurement Device |
| Dimensions | 7.5 x 4.5 x 1.2 inches (190 x 114 x 30 mm) |
| Weight | 1.2 lbs (0.54 kg) |
| Power Supply | 9V battery or optional AC adapter |
| Display | LCD screen with backlight |
| Functions | Measurement, control, data logging |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Battery Life | Approximately 200 hours of continuous use |
| Auto Power Off | After 10 minutes of inactivity |
| Measurement Accuracy | ±0.5% of reading + 2 digits |
| Measurement Range | 0 to 9999 units |
| Sample Rate | 2 times per second |
| Data Logging Capacity | Up to 1000 readings |
| Interface | USB for data transfer (optional cable) |
| Case Material | High-impact ABS plastic |
| Maintenance | Clean with a soft, dry cloth. Do not use solvents. |
| Safety | Follow instructions in the manual. Keep away from moisture. |
| Spare Parts | Contact authorized service centers for replacements. |
| Repair | Do not attempt to repair yourself. Refer to qualified personnel. |
| General Information | User manual available for download in PDF format. |
Frequently Asked Questions - E-4 Electronics International
How do I turn on the E-4 device?
Press and hold the ON/OFF button for 2 seconds until the display lights up.
What type of battery does the E-4 use?
The E-4 uses a standard 9V battery. Ensure correct polarity when inserting.
How do I change the measurement unit?
Press the UNIT button repeatedly to cycle between available units (e.g., metric/imperial).
Why is the display showing 'OL'?
'OL' indicates an overload condition. The input signal exceeds the maximum range. Reduce the input.
How do I calibrate the E-4?
Calibration requires a known reference. Refer to the manual for step-by-step calibration procedure.
Can I use the E-4 with an AC adapter?
Yes, use an optional AC adapter (output 9V DC, 300mA) plugged into the side jack.
How do I enable data logging?
Press the LOG button to start logging. The device will store readings at the set interval.
What should I do if the device gets wet?
Immediately remove the battery and dry the device with a soft cloth. Do not use heat.
How do I reset the E-4 to factory settings?
Turn off the device, then press and hold the MENU button while turning it on. Follow on-screen prompts.
Where can I find the user manual?
The manual is available for free download on notice-facile.com in PDF format.
User questions about E-4 Electronics International
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual E-4 - Electronics International and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E-4 by Electronics International.
USER MANUAL E-4 Electronics International
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Electronics International
Model : E-4
Category : Uncategorized