EC-2 - Uncategorized Electronics International - Free user manual and instructions
Find the device manual for free EC-2 Electronics International in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic Controller |
| Brand | Electronics International |
| Model | EC-2 |
| Dimensions (L x W x H) | 4.5 x 2.5 x 1.2 inches (114 x 64 x 30 mm) |
| Weight | 4.2 oz (120 g) |
| Power Supply | 9V DC (battery or adapter) |
| Battery Type | 9V alkaline (not included) |
| Power Consumption | < 0.5W |
| Display Type | LED indicators |
| Control Interface | Rotary knob and push buttons |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Housing Material | ABS plastic |
| Certification | CE, RoHS |
| Main Function | Timing and control |
| Output Type | Relay contact |
| Maximum Load | 10A @ 120VAC |
| Number of Programs | 8 |
| Backup Memory | Yes (EEPROM) |
| Included Accessories | User manual, mounting screws |
| Cleaning | Wipe with dry cloth |
| Safety Features | Overload protection |
| Spare Parts / Repair | Not user-serviceable; contact support |
| Warranty | 1 year limited |
| Manual Language | English |
Frequently Asked Questions - EC-2 Electronics International
How do I set the timer on the EC-2?
To set the timer, rotate the knob to the desired time, then press the start button. Refer to the user manual for detailed programming steps.
What type of battery does the EC-2 use?
The EC-2 uses a standard 9V alkaline battery (not included). You can also use a 9V DC power adapter with a compatible plug.
Can I use a power adapter instead of a battery?
Yes, the EC-2 can be powered via a 9V DC adapter (center positive, 2.1mm plug). Ensure the adapter provides sufficient current (min 300mA).
The display is not lighting up. What should I do?
First, check if the battery is installed correctly or if the power adapter is connected. If using a battery, try a fresh 9V battery. If the issue persists, the device may need service.
How do I reset the EC-2 to factory defaults?
Press and hold the reset button (located on the back) for 5 seconds until all LED indicators flash. This clears all programmed settings.
Is the EC-2 waterproof?
No, the EC-2 is not waterproof. It is designed for indoor use only. Keep it away from moisture and liquids to prevent damage.
What is the maximum load the EC-2 can handle?
The EC-2 relay can handle a maximum load of 10A at 120VAC (resistive). For inductive loads, derate to 5A. Do not exceed these limits.
How do I clean the EC-2?
Clean the exterior with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Ensure the device is disconnected from power before cleaning.
Can I mount the EC-2 on a wall?
Yes, the EC-2 has mounting holes on the back. Use the included screws to attach it securely to a wall. Ensure the mounting surface is dry and stable.
Where can I find the user manual for the EC-2?
The user manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by providing your email.
User questions about EC-2 Electronics International
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual EC-2 - Electronics International and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EC-2 by Electronics International.
USER MANUAL EC-2 Electronics International
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Electronics International
Model : EC-2
Category : Uncategorized