T2000SFL - Avionics Microair - Free user manual and instructions
Find the device manual for free T2000SFL Microair in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Aircraft VHF Transceiver with Intercom |
| Brand | Microair |
| Model | T2000SFL |
| Category | Avionics |
| Frequency Range | 118.000 – 136.975 MHz |
| Channel Spacing | 25 kHz (720 channels) or 8.33 kHz (2280 channels) |
| Power Output | 5 Watts (typical) |
| Dimensions (H x W x D) | 1.75 x 6.25 x 8.5 inches (44 x 159 x 216 mm) |
| Weight | 1.5 lbs (0.68 kg) |
| Power Supply | 11 – 30 VDC, 0.5 A max at 13.8 V |
| Intercom | Built-in 2-place intercom with VOX |
| Display | Backlit LCD with frequency, channel, and status |
| Memory Channels | 20 programmable memory channels |
| Mounting | Panel mount with optional tray |
| Antenna Impedance | 50 ohms |
| Audio Output | 5W into 4 ohms |
| Environmental Protection | Splash resistant front panel |
| Certification | FAA TSO C128 for VHF Com |
| Maintenance | No periodic calibration required; clean with damp cloth |
| Spare Parts Availability | Repair service and parts available through authorized Microair dealers |
| General Information | Operates in VHF aviation band; includes squelch, volume, and dimmer controls |
Frequently Asked Questions - T2000SFL Microair
How do I set the frequency on the Microair T2000SFL?
Press the FREQ button to enter frequency mode. Use the tuning knob to select the desired frequency in MHz. Press the ENT button to confirm.
Can I store and recall preset channels?
Yes. To store a frequency, press MEM then select a memory channel using the tuning knob and press ENT. To recall, press RCL and select the channel.
What is the power output of the T2000SFL?
The typical RF power output is 5 Watts into a 50 ohm antenna.
Does the T2000SFL have an intercom function?
Yes, it includes a built-in 2-place intercom with voice-activated (VOX) squelch. Adjust the VOX level using the intercom settings.
What is the voltage range for the T2000SFL?
It operates from 11 to 30 VDC. Use a suitable avionics power supply. Maximum current draw is 0.5 A at 13.8 V.
How do I adjust the squelch?
Press the SQL button. Use the tuning knob to set the desired squelch threshold. A higher setting reduces background noise but may require stronger signals.
Can I use 8.33 kHz channel spacing?
Yes, the T2000SFL supports both 25 kHz and 8.33 kHz channel spacing. Set the spacing option in the setup menu.
How do I perform a factory reset?
Turn off the unit, then press and hold the PWR and FREQ buttons simultaneously while turning on. Release when the display shows 'RESET'.
What type of antenna is recommended?
Use a VHF aviation band antenna with a 50 ohm impedance and SWR below 2:1. A whip antenna or blade antenna is typical.
How do I clean the T2000SFL?
Wipe the front panel with a soft, damp cloth. Do not use solvents or abrasive cleaners. Ensure the unit is off before cleaning.
User questions about T2000SFL Microair
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Avionics in PDF format for free! Find your manual T2000SFL - Microair and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. T2000SFL by Microair.
USER MANUAL T2000SFL Microair
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Microair
Model : T2000SFL
Category : Avionics