MAGMATIC Magma Prime - Lighting Elation - Free user manual and instructions
Find the device manual for free MAGMATIC Magma Prime Elation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Lighting Fixture |
| Light Source | 200W White LED |
| Color Wheel | 13 colors + open |
| Gobo Wheel | 13 static gobos + open |
| Beam Angle | 5° to 27° motorized zoom |
| Pan Range | 540° |
| Tilt Range | 270° |
| Control Protocol | DMX512, RDM, Art-Net |
| DMX Channels | 14 / 16 / 19 selectable |
| Power Consumption | 350W maximum |
| Power Supply | 100-240V, 50/60Hz |
| Dimensions (LxWxH) | 290 x 220 x 480 mm |
| Weight | 9.5 kg |
| Housing Material | Aluminum alloy |
| Cooling | Fan-cooled |
| IP Rating | IP20 |
| Photometric Data | Luminous flux: 10,000 lm; CRI > 80 |
| Strobe | 0-25 Hz, adjustable |
| Dimmer | 0-100% linear |
| Features | Motorized focus, frost filter, LCD display |
| Maintenance | Clean lenses with mild soap; check fans monthly |
| Safety | Use safety cable; avoid moisture |
| Spare Parts | Replacement lamps, gobos, fans available |
| Warranty | 2 years limited |
Frequently Asked Questions - MAGMATIC Magma Prime Elation
How do I clean the lens of the MAGMATIC Magma Prime?
Use a soft, lint-free cloth with a mild cleaning solution. Avoid abrasive cleaners that can damage the coating.
What is the recommended distance for safe operation?
Maintain at least 0.5 meters from flammable materials and ensure proper ventilation around the fixture.
Can I use the fixture outdoors?
No, the MAGMATIC Magma Prime is rated IP20 for indoor use only. Exposure to moisture or dust may damage the unit.
How do I connect the fixture to a DMX controller?
Use a 3-pin or 5-pin XLR cable to connect from the DMX output of the controller to the DMX input of the fixture. Set the correct DMX address via the LCD menu.
What should I do if the fixture does not respond to DMX?
Check the DMX cable connections, verify the DMX address, and ensure the controller is sending data. Also confirm that the fixture is not in standalone mode.
How often should I replace the LED module?
The LED module is rated for 50,000 hours. Replacement is only needed if the light output dims significantly or fails.
Can I replace the gobos?
Yes, gobos are user-replaceable. Open the gobo wheel cover, remove the existing gobo, and insert a new one of the same size.
What is the maximum ambient temperature for operation?
The fixture can operate in ambient temperatures up to 40°C (104°F). Higher temperatures may cause overheating.
How do I update the firmware?
Use the USB port on the fixture to upload firmware via a USB flash drive. Download the latest firmware from the Elation website and follow the update instructions in the manual.
What does the 'auto standby' mode do?
If no DMX signal is detected for 2 minutes, the fixture enters standby to save power. It resumes automatically when a signal is received.
User questions about MAGMATIC Magma Prime Elation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual MAGMATIC Magma Prime - Elation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MAGMATIC Magma Prime by Elation.
USER MANUAL MAGMATIC Magma Prime Elation
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Elation
Model : MAGMATIC Magma Prime
Category : Lighting