Design LED 36 Pro - Lighting Elation - Free user manual and instructions
Find the device manual for free Design LED 36 Pro Elation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Fixture |
| Brand | Elation |
| Model | Design LED 36 Pro |
| Dimensions (L x W x H) | 12.2 x 10.6 x 9.8 inches (310 x 270 x 250 mm) |
| Weight | 13.2 lbs (6 kg) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 120W |
| Light Source | 36 x 3W RGB LEDs |
| Beam Angle | 25° |
| DMX Channels | 3, 5, or 7 selectable |
| Control Protocol | DMX512 |
| Cooling | Fan-cooled |
| Housing Material | Aluminum die-cast |
| IP Rating | IP20 (indoor use only) |
| Functions | RGB color mixing, strobe, dimmer (0-100%), master/slave, auto programs |
| Maintenance & Cleaning | Clean lens with a soft, lint-free cloth; avoid solvents |
| Safety | Allow 6 inches (15 cm) clearance around vents; use safety cable |
| Spare Parts & Repairability | Replacement LEDs and power supply available; contact Elation support |
| Included Accessories | Power cable, gel frame, mounting bracket, safety cable, manual |
| Certifications | CE, ETL |
Frequently Asked Questions - Design LED 36 Pro Elation
How do I set the DMX address on the Design LED 36 Pro?
Use the four-button menu on the rear panel. Press MENU until DMX Address appears, then use UP/DOWN to set the address (1-512). Press ENTER to confirm.
What is the beam angle of this fixture?
The Design LED 36 Pro has a fixed 25° beam angle, suitable for wash or narrow spot applications.
Can I operate this unit without a DMX controller?
Yes, use the built-in master/slave mode or auto mode. Select 'Auto' or 'Sound Active' in the menu for standalone operation.
How do I clean the lens?
Disconnect power and wipe the lens gently with a soft, dry cloth. For stubborn dirt, use a mild glass cleaner applied to the cloth, not directly to the lens.
What power cable do I need?
The fixture includes a standard IEC power cable (male to female). It operates on 100-240V AC, so only a regional plug adapter may be required.
Why is the fixture not responding to DMX?
Check that the DMX address matches your controller, the cable is not damaged, and termination is set if needed. Also ensure the fixture is in DMX mode (not Auto).
What is the maximum ambient temperature for operation?
The unit is rated for ambient temperatures up to 104°F (40°C). Avoid using in direct sunlight or near heat sources.
How do I perform a factory reset?
Press MENU until Factory Reset appears, then press ENTER. Confirm with ENTER again. All settings will return to defaults.
Can I replace the LEDs myself?
LED replacement should be performed by qualified service personnel. Contact Elation support for authorized repair centers.
What is the warranty period?
Elation provides a 2-year limited warranty from the date of purchase covering defects in materials and workmanship.
User questions about Design LED 36 Pro Elation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Design LED 36 Pro - Elation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Design LED 36 Pro by Elation.
USER MANUAL Design LED 36 Pro Elation
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Elation
Model : Design LED 36 Pro
Category : Lighting