KL Cyc S - Lighting Elation - Free user manual and instructions
Find the device manual for free KL Cyc S Elation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Cyclorama Light |
| Model | KL Cyc S |
| Brand | Elation |
| Light Source | RGBW LEDs |
| Power Consumption | 150 W |
| Voltage | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | 24.0 x 11.0 x 10.5 in (610 x 279 x 267 mm) |
| Weight | 15.4 lbs (7.0 kg) |
| Beam Angle | 120° x 60° |
| Color Temperature | Not applicable (RGBW mixing) |
| DMX Channels | 4, 6, or 8 channel modes |
| Control Protocol | DMX512 |
| Operating Modes | DMX, Standalone, Master/Slave, Sound Active |
| Housing Material | Aluminum and heat-resistant plastic |
| Cooling System | Passive convection |
| IP Rating | IP20 (indoor use only) |
| Mounting Options | Floor standing or truss mount via yoke |
| Included Accessories | Power cord, DMX cable, mounting hardware |
| Maintenance | Clean lens with soft cloth; no user-serviceable parts |
| Safety | Do not expose to rain or moisture; disconnect power when not in use |
| Spare Parts | Contact Elation support for replacement LEDs or driver |
| Reparability | Repair by authorized technician only |
| Warranty | 2 years limited |
Frequently Asked Questions - KL Cyc S Elation
How do I connect the KL Cyc S to a DMX controller?
Use a standard 5-pin DMX cable to connect the DMX IN port on the fixture to the controller. Set the DMX address using the fixture's control panel. Refer to the manual for channel mapping.
Can I use the KL Cyc S outdoors?
No, the fixture is IP20 rated for indoor use only. Exposure to rain or moisture may cause damage.
What is the beam angle of the KL Cyc S?
The beam angle is 120° x 60°, suitable for even washing of cyclorama or backdrop.
How do I change the DMX channel mode?
Press the MENU button to access the settings. Navigate to 'DMX Mode' and select 4CH, 6CH, or 8CH as needed. Confirm with ENTER.
What power cable does the KL Cyc S use?
It uses a standard IEC power cable (included). The fixture accepts AC 100-240V, 50/60Hz.
How do I clean the lens of the KL Cyc S?
Disconnect power, then gently wipe the lens with a soft, dry cloth. Do not use solvents or abrasive cleaners.
Can I run the KL Cyc S in sound-active mode?
Yes. Set the operating mode to 'Sound Active' via the menu. The fixture will respond to ambient music via the built-in microphone.
What is the weight of the KL Cyc S?
The fixture weighs 15.4 lbs (7.0 kg), excluding accessories.
How do I mount the KL Cyc S on a truss?
Attach a clamp to the yoke base and secure it to the truss. Ensure the fixture is properly balanced and safety cabled.
What is the expected lifespan of the LEDs?
The RGBW LEDs are rated for approximately 50,000 hours of operation, depending on usage conditions.
User questions about KL Cyc S Elation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual KL Cyc S - Elation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KL Cyc S by Elation.
USER MANUAL KL Cyc S Elation
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Elation
Model : KL Cyc S
Category : Lighting