Design Spot 300E - Lighting Elation - Free user manual and instructions
Find the device manual for free Design Spot 300E Elation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Spotlight |
| Model | Design Spot 300E |
| Brand | Elation |
| Light Source | MSR 300 Discharge Lamp (300W) |
| Color Mixing | CMY (Cyan, Magenta, Yellow) with variable speeds |
| Color Wheel | 8 colors plus open |
| Gobos | 8 rotating gobos (2 glass, 6 metal) plus open |
| Prism | 3-facet rotating prism |
| Frost | Variable frost filter |
| Dimmer | 0-100% electronic dimmer |
| Strobe | Variable speed (0-20 Hz) |
| Pan/Tilt | Pan: 540°, Tilt: 270°, with 16-bit resolution |
| DMX Channels | 27 channels |
| Power Supply | AC 100-240V, 50/60Hz, 450W max consumption |
| Dimensions (LxWxH) | 495 x 395 x 700 mm (19.5 x 15.5 x 27.6 inches) |
| Weight | 25 kg (55 lbs) |
| Housing | Aluminum and steel, black finish |
| Cooling | Active cooling with temperature-controlled fan |
| Safety Features | Safety cable attachment point, automatic power-off when cover opened |
| Maintenance | Clean lens and fan grille periodically; lamp replacement every 2000 hours approx. |
| Spare Parts | Lamps, gobos, color wheels, power supply units available from Elation |
Frequently Asked Questions - Design Spot 300E Elation
What type of lamp does the Design Spot 300E use?
The Design Spot 300E uses a MSR 300 discharge lamp (300W). Always replace with the same type to avoid damage.
How do I clean the lens and optics?
Use a soft, lint-free cloth with isopropyl alcohol. Gently wipe the lens and mirrors. Avoid abrasive cleaners.
What is the DMX channel count?
The fixture uses 27 DMX channels for full control of all features (pan, tilt, color, gobo, prism, etc.).
How do I reset the fixture?
Press the Menu button, navigate to 'Reset' in the onboard display menu, and confirm. The fixture will recalibrate pan, tilt, and effects.
What should I do if the fixture overheats?
The fixture has an automatic thermal shutoff. Allow it to cool, then check that ventilation grilles are clear and fans are operational.
How often should I replace the lamp?
Replace the lamp after 2000 hours of use or if it shows signs of discoloration or flickering.
Can I use the fixture without DMX?
Yes, the fixture can operate in stand-alone mode using built-in automated programs or sound activation.
What is the maximum ambient temperature for operation?
The maximum ambient temperature is 40°C (104°F). Do not operate in direct sunlight or near heat sources.
How do I replace a gobo?
Remove the gobo wheel cover, take out the old gobo, and insert the new one with the printed side facing the lamp. Secure the cover and recalibrate via menu.
Does the fixture support RDM?
Yes, the Design Spot 300E is RDM-enabled (Remote Device Management) for remote configuration and monitoring.
User questions about Design Spot 300E Elation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Design Spot 300E - Elation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Design Spot 300E by Elation.
USER MANUAL Design Spot 300E Elation
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Elation
Model : Design Spot 300E
Category : Lighting