PX9118 - Sensor IFM - Free user manual and instructions
Find the device manual for free PX9118 IFM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Sensor |
| Model | PX9118 |
| Brand | IFM |
| Dimensions (approx.) | 50 x 30 x 20 mm |
| Weight (approx.) | 50 g |
| Power Supply | 10-30 V DC |
| Output Signal | 4-20 mA analog / IO-Link |
| Measuring Range | 0-10 bar (typical) |
| Operating Temperature | -25 to 80 °C |
| Protection Rating | IP67 |
| Main Functions | Pressure measurement, monitoring, process control |
| Maintenance & Cleaning | Clean with dry cloth; avoid aggressive solvents |
| Safety Instructions | Disconnect power before installation; follow EMC guidelines |
| Spare Parts & Repairability | Contact IFM support for replacement parts; not user-serviceable |
| Certifications | CE, RoHS |
| Connection Type | M12 x 1, 4-pin |
| Media Contact | Stainless steel 316L |
| Housing Material | Stainless steel / PBT |
| Pressure Type | Gauge / Relative |
| Response Time | < 5 ms |
Frequently Asked Questions - PX9118 IFM
How do I wire the IFM PX9118 sensor?
Connect the M12 connector according to the pinout: pin 1 = brown (V+), pin 2 = white (not used), pin 3 = blue (V-), pin 4 = black (signal output). Ensure power is off during wiring.
What is the output signal of the PX9118?
The sensor provides a 4-20 mA analog output and also supports IO-Link communication for digital data transmission.
Can I use the PX9118 for liquids and gases?
Yes, it is suitable for both liquids and gases that are compatible with stainless steel 316L and PBT materials.
What is the maximum pressure range?
The standard range is 0-10 bar, but other ranges may be available. Check the label on the device for exact specifications.
How do I clean the sensor?
Wipe the housing with a soft dry cloth. For heavy contamination, use mild soap and water. Avoid abrasive cleaners or solvents.
Is the sensor protected against moisture and dust?
Yes, it has an IP67 rating, meaning it is dust-tight and can withstand temporary immersion in water.
What is the operating temperature range?
The PX9118 operates reliably between -25 °C and 80 °C.
How do I configure the sensor?
Configuration can be done via IO-Link using a master device and software, or by using the analog output scaling options.
The sensor shows no output. What should I check?
First, verify the power supply (10-30 V DC). Check the wiring for loose connections. Ensure the pressure range is within limits. If issue persists, test with a known good unit.
Where can I find the complete manual?
The manual is available for free download at notice-facile.com. Search for 'IFM PX9118' to access the PDF with detailed instructions.
User questions about PX9118 IFM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sensor in PDF format for free! Find your manual PX9118 - IFM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PX9118 by IFM.
USER MANUAL PX9118 IFM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IFM
Model : PX9118
Category : Sensor