ID8505 - Sensor IFM - Free user manual and instructions
Find the device manual for free ID8505 IFM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inductive Proximity Sensor |
| Model | ID8505 |
| Brand | IFM |
| Dimensions | M12 x 1.0, length 50 mm |
| Weight | 30 g |
| Supply Voltage | 10...36 VDC |
| Output Type | PNP / NPN programmable |
| Switching Frequency | ≤ 800 Hz |
| Sensing Distance | 4 mm flush mountable |
| Housing Material | Stainless steel (1.4305) |
| Protection Class | IP67 |
| Ambient Temperature | -25…70 °C |
| Connection | M12 connector, 4-pin |
| Indication | LED yellow (switching state) |
| Functions | Non-contact detection of metallic objects; short-circuit and reverse polarity protection |
| Maintenance | Keep sensing face clean; wipe with dry cloth if needed |
| Safety Notes | Disconnect power before installation; do not exceed voltage limits |
| Spare Parts | Not applicable (non-serviceable solid-state device) |
| Repairability | Not repairable; replace entire unit if defective |
| Certifications | CE, UL, RoHS |
| Included Accessories | Mounting nut, instruction leaflet |
Frequently Asked Questions - ID8505 IFM
What is the sensing distance of the IFM ID8505 sensor?
The nominal sensing distance is 4 mm, but it can be adjusted with a potentiometer (if equipped). Actual range depends on target material and size.
Can I use the ID8505 in a wet environment?
Yes, it has IP67 protection, meaning it is dust-tight and can withstand temporary immersion in water up to 1 meter for 30 minutes.
What output type does the ID8505 have?
The sensor offers a programmable PNP or NPN output. You can select the desired configuration via wiring or a selector switch.
How do I connect the ID8505 sensor?
Use an M12 4-pin connector. Pin 1: brown = +VDC, Pin 2: white = output, Pin 3: blue = GND, Pin 4: black = programming (if applicable). Refer to the manual for exact pinout.
What is the maximum switching frequency?
The maximum switching frequency is 800 Hz, suitable for high-speed detection in many industrial applications.
Is the ID8505 suitable for detecting non-ferrous metals?
Yes, inductive sensors can detect any conductive metal, but the sensing distance may be reduced for non-ferrous materials like aluminum or copper (typically 50-70% of nominal).
What does the LED indicator mean?
The yellow LED lights up when the sensor is in the switched state (output active). It provides visual confirmation of detection.
Can I flush mount the ID8505?
Yes, the sensor is designed for flush mounting in metal, with a reduced sensing distance of approximately 4 mm. Ensure the surrounding material is not conductive.
What is the operating voltage range?
The sensor operates on a supply voltage of 10 to 36 VDC. It has built-in protection against reverse polarity and short circuits.
How do I clean the sensor?
Regularly wipe the sensing face with a clean, dry cloth. Do not use solvents or abrasive cleaners as they may damage the housing or active surface.
User questions about ID8505 IFM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sensor in PDF format for free! Find your manual ID8505 - IFM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ID8505 by IFM.
USER MANUAL ID8505 IFM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IFM
Model : ID8505
Category : Sensor