PY2007 - Sensor IFM - Free user manual and instructions
Find the device manual for free PY2007 IFM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Photoelectric Sensor |
| Model | PY2007 |
| Brand | IFM |
| Detection Range | 0.1–15 m (depending on reflector) |
| Light Source | Red LED, 650 nm |
| Supply Voltage | 10–36 V DC |
| Output Type | PNP, NPN (selectable) |
| Switching Frequency | 500 Hz |
| Connection | M12 connector, 4-pin |
| Housing Material | Stainless steel (V2A) |
| Protection Class | IP67 |
| Operating Temperature | -25°C to +60°C |
| Dimensions | Ø18 mm, length 65 mm |
| Weight | approx. 50 g |
| Mounting | Through-hole or bracket |
| Indicator | Yellow LED (switching status) |
| Maintenance | Keep lens clean; check alignment periodically |
| Safety | Complies with EN 60947-5-2 |
| Spare Parts | Reflectors, brackets, cables (see manual) |
| Repairability | Replaceable unit; no user-serviceable parts |
| Application | Object detection, presence sensing |
Frequently Asked Questions - PY2007 IFM
How to adjust the sensitivity of the PY2007 sensor?
Use the potentiometer on the sensor or perform a teach-in procedure. Refer to the manual for exact steps.
What is the maximum cable length for the PY2007?
The maximum cable length is 100 meters when using proper wire gauge and avoiding interference.
Can the PY2007 detect transparent objects?
Yes, with a suitable reflector, the sensor can detect transparent objects like glass or plastic bottles.
How to clean the lens of the sensor?
Use a soft, lint-free cloth lightly dampened with water or mild detergent. Do not use solvents or abrasive materials.
What happens if the sensor is overloaded?
The output will switch off temporarily. The sensor resets automatically when the overload condition is removed.
Is the PY2007 suitable for outdoor use?
Yes, with an IP67 rating, it is protected against dust and water immersion up to 1 meter.
How to connect the PY2007 to a PLC?
Connect the output wire to the PLC input, ensure common ground, and set the output type (PNP/NPN) as required.
What should I do if the sensor does not respond?
Check power supply, wiring connections, lens cleanliness, and alignment. Also verify that the output type matches your load.
Can the sensor be used with DC only?
Yes, the supply voltage range is 10–36 V DC. Do not connect AC power.
Where can I find the user manual for PY2007?
Download the manual from the IFM website or visit notice-facile.com for a free PDF copy.
User questions about PY2007 IFM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sensor in PDF format for free! Find your manual PY2007 - IFM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PY2007 by IFM.
USER MANUAL PY2007 IFM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IFM
Model : PY2007
Category : Sensor