Model Three - Loudspeaker KLH Audio - Free user manual and instructions
Find the device manual for free Model Three KLH Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Loudspeaker |
| Brand | KLH Audio |
| Model | Model Three |
| Speaker Configuration | 2-Way Bass Reflex |
| Tweeter | 1-inch Silk Dome |
| Woofer | 6.5-inch Paper Cone |
| Frequency Response | 55 Hz - 20 kHz (±3 dB) |
| Sensitivity | 91 dB (2.83V/1m) |
| Impedance | 8 Ohms |
| Recommended Amplifier Power | 20 - 150 Watts RMS |
| Dimensions (H x W x D) | 14.5 x 8.5 x 10 inches (368 x 216 x 254 mm) |
| Weight (each) | 14 lbs (6.35 kg) |
| Input Type | Binding Posts (5-way) |
| Safety Features | Magnetically shielded, non-slip base |
| Cleaning Instructions | Wipe with a soft, dry cloth; avoid liquids and abrasives |
| Maintenance | Check driver connections annually; tighten screws if needed |
| Spare Parts Availability | Drivers and crossovers available through KLH Audio support |
| Repairability | Modular components; serviceable by qualified technician |
| Placement | Bookshelf or stand; at least 6 inches from rear wall |
Frequently Asked Questions - Model Three KLH Audio
What is the recommended amplifier power for the KLH Model Three?
The recommended amplifier power is between 20 and 150 Watts RMS per channel. Ensure your amplifier can drive 8 ohm loads.
Can I use the Model Three as a center channel speaker?
While designed as a bookshelf speaker, you can use a single Model Three as a center channel. However, for optimal timbre matching, use three identical speakers across the front stage.
What is the best placement for the KLH Model Three?
Place on a sturdy bookshelf or stand. Keep at least 6 inches from the rear wall and 12 inches from side walls. Angle the speakers slightly toward the listening position.
How do I clean the KLH Model three speakers?
Use a soft, dry microfiber cloth to dust the cabinet. Do not apply any liquids or cleaning agents, as they may damage the finish. For the grille, gently vacuum with a soft brush attachment.
Are the KLH Model Three speakers magnetically shielded?
Yes, the Model Three features magnetic shielding, allowing safe placement near CRT televisions or other magnetic-sensitive equipment.
What type of speaker wire should I use?
Use high-quality 14-16 gauge speaker wire with banana plugs or bare wire. Ensure proper polarity (+ to +, - to -) for correct phase.
Can I bi-wire or bi-amp the KLH Model Three?
Standard Model Three has a single set of binding posts. Bi-wiring or bi-amping is not possible without modification. Use a single amplifier with appropriate power.
What is the warranty period for the KLH Model three?
KLH Audio typically offers a 5-year limited warranty on the Model Three for original owners. Check the included documentation or contact KLH support for details.
How do I break in the KLH Model Three speakers?
Play music at moderate levels (around 75 dB) for 20-30 hours to allow the suspension to loosen. Avoid excessive volume during the first few hours.
Where can I find replacement parts for the Model Three?
Contact KLH Audio customer service or visit their official website for spare drivers, crossover components, and grilles. A qualified technician can perform repairs.
User questions about Model Three KLH Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Model Three - KLH Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Model Three by KLH Audio.
USER MANUAL Model Three KLH Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KLH Audio
Model : Model Three
Category : Loudspeaker