Kendall 2B - Loudspeaker KLH Audio - Free user manual and instructions
Find the device manual for free Kendall 2B KLH Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Bookshelf Loudspeaker |
| Brand | KLH Audio |
| Model | Kendall 2B |
| Dimensions (H x W x D) | 14.0 x 8.25 x 10.5 inches (35.6 x 21.0 x 26.7 cm) |
| Weight | 16.5 lbs (7.5 kg) each |
| Frequency Response | 55 Hz - 20 kHz ± 3 dB |
| Sensitivity | 87 dB (2.83V/1m) |
| Impedance | 8 ohms (nominal) |
| Recommended Amplifier Power | 25 - 150 watts RMS |
| Drivers | 1-inch silk dome tweeter, 6.5-inch woven fiber woofer |
| Enclosure Type | Bass reflex (rear ported) |
| Finish | Walnut vinyl veneer or Black ash |
| Grille | Removable black cloth grille |
| Binding Posts | Gold-plated 5-way binding posts |
| Bi-Wiring / Bi-Amping | Yes (dual binding posts) |
| Cleaning and Care | Wipe with a dry, soft cloth. Avoid chemical cleaners. |
| Safety Warnings | Do not expose to moisture or extreme temperatures. Keep away from magnetic sources. |
| Replacement Parts | Contact KLH Audio or authorized dealer for drivers and crossovers. |
| Repairability | Service should be performed by qualified personnel only. |
Frequently Asked Questions - Kendall 2B KLH Audio
What is the recommended amplifier power for the Kendall 2B?
The recommended amplifier power is 25 to 150 watts RMS per channel. Ensure your amplifier can handle an 8-ohm nominal impedance.
Can I bi-wire or bi-amp the Kendall 2B?
Yes, the Kendall 2B features dual binding posts that allow for bi-wiring or bi-amping. Remove the jumper links to separate the tweeter and woofer circuits.
What is the frequency response and sensitivity?
Frequency response is 55 Hz to 20 kHz ±3 dB. Sensitivity is 87 dB (2.83V/1m). They are moderately efficient.
How should I place the speakers for best sound?
Place the speakers at least 1-2 feet from walls to avoid excessive bass. Angle them slightly toward the listening position (toe-in). The tweeters should be at ear level.
Is the speaker ported or sealed?
The Kendall 2B is a bass reflex design with a rear-firing port. Keep the port unobstructed for proper bass response.
What type of drivers are used?
It features a 1-inch silk dome tweeter and a 6.5-inch woven fiber cone woofer, known for smooth highs and well-defined midrange.
How do I clean the speakers?
Wipe the cabinet with a dry, soft cloth. For the grille, gently vacuum with a brush attachment. Avoid water, solvents, or abrasive cleaners.
What is the warranty on the Kendall 2B?
KLH Audio typically offers a 5-year limited warranty on passive speakers. Check your manual or contact KLH for details.
Can I use these speakers with a subwoofer?
Yes, they pair well with a subwoofer. Set the subwoofer crossover around 60-80 Hz to blend seamlessly with the Kendall 2B's low end.
Do the speakers require break-in?
While not mandatory, a break-in period of 20-50 hours at moderate volume can help the suspension and drivers reach optimal performance.
User questions about Kendall 2B KLH Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Kendall 2B - KLH Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Kendall 2B by KLH Audio.
USER MANUAL Kendall 2B KLH Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KLH Audio
Model : Kendall 2B
Category : Loudspeaker