Totalpure 1400 Style - Air purifier CECOTEC - Free user manual and instructions

Product Type	Air Purifier
Brand	Cecotec
Model	Totalpure 1400 Style
Dimensions (L x W x H)	30 x 30 x 50 cm
Weight	5 kg
Power Supply	220-240 V, 50 Hz
Nominal Power	50 W
Coverage Area	30 m²
Filtration Technology	HEPA Filter + Activated Carbon Filter
Number of Speeds	3
Timer Function	Yes, 2/4/8 h
Ionizer Function	Yes
Noise Level	25 - 48 dB
Display	LED with Air Quality Sensor
Air Quality Sensor	Particles (PM2.5)
Night Mode	Yes, with lights off
Standby Consumption	< 1 W
Filter Maintenance	Clean every 3 months, replace every 6 to 12 months
Safety	Automatic shut-off in case of overheating
Spare Parts Available	Replacement filter (HEPA + carbon)

Frequently Asked Questions - Totalpure 1400 Style CECOTEC

How to change the filter of my Cecotec Totalpure 1400 Style?

Turn off the appliance and unplug it. Open the rear panel, remove the old filter, insert the new filter (compatible reference) and close. Reset the replacement indicator if present.

What is the coverage area of this purifier?

The Cecotec Totalpure 1400 Style is suitable for rooms up to 30 m², with an optimal air exchange rate.

How often should I clean the filter?

It is recommended to clean the filter every 3 months with a low-power vacuum cleaner. Full replacement is advised every 6 to 12 months depending on usage.

Does the purifier make noise in night mode?

In night mode, the fan runs at low speed, producing a noise level of about 25 dB, which is nearly silent and suitable for sleep.

How to interpret the colors of the air quality sensor?

The sensor displays a color: blue for good air, green for moderate, orange for poor, and red for very poor. It measures PM2.5 particles in real time.

Can I use the ionizer at the same time as the filtration?

Yes, the ionizer function can be activated independently or in addition to filtration to improve the removal of fine particles.

How to set the timer?

Press the timer button to select 2, 4, or 8 hours. The appliance will turn off automatically after the chosen delay.

What to do if the purifier does not turn on?

Check that the outlet works and the cord is properly plugged in. Make sure the rear panel is correctly closed. If the problem persists, contact customer service.

Where to buy a replacement filter?

Replacement filters are available on the official Cecotec website, from authorized dealers, or online. Use the reference specific to the Totalpure 1400 Style model.

Does the purifier consume a lot of electricity?

With a power of 50 W in operation and less than 1 W on standby, consumption is very low, about 0.05 kWh per hour.

USER MANUAL Totalpure 1400 Style CECOTEC

TOTALPURE 1400 STYLE

Purificador de aire/ Air purifier

1. Parts and components 27
2. Before use 27
3. Operation 27
4. Cleaning and maintenance 28
5. Technical specifications 29
6. Disposal of old electrical appliances 29
7. Technical support and warranty 29

SOMMAIRE

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

• Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the wall outlet is grounded.
• This appliance is designed for household use only.
• Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec in order to avoid any type of danger.
• To avoid electric shocks, do not clean with or allow to get inside the product: water, liquid or any flammable substance.
• Do not immerse the cord, plug, or any non-removable part of the appliance in water or any other liquid, nor expose the electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.
• Switch off the device immediately in the event of defects or malfunctions.
• Do not use the device if its cord or any other part is damaged. In this case, contact the official Technical Support Service of Cecotec.
• Do not install the device near heat-generating appliances, flammable, dangerous materials, or in places where temperature or humidity levels are high.
• This product does not replace normal ventilation or extraction products.
• Make sure the product is kept and stored in well-ventilated areas.
• The device must be placed so that the plug is accessible.
• Do not sit or stand on the device.

• Do not use outdoors.

• Do not insert fingers or other objects in the air inlet or outlet to prevent injuries and product damage.

• Do not twist, bend, strain, or damage the power cord in any way. Protect it from sharp edges and heat sources. Do not let it touch hot surfaces. Do not let the cord hang over the edge of the surface.
• Regularly clean the plug with a dry cloth to prevent dust from building up and to avoid product damage.
• This appliance cannot be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge. Children shall not play with the appliance.

INSTRUCTIONS DE SÉCURITÉ

• Take the product out of the box.
• Remove all packaging material. Save the original box.
• Make sure all parts and components are included and in good conditions. If any visible signs of damage are observed, contact the Technical Support Service immediately.

3. OPERATION

Power button

• When the machine is in standby mode, press the Power button to turn the machine on and off.
• Every time the Power button is pressed, the device will beep one. Press the Power button once, the device will start running at low mode by default. The corresponding indicator will turn on.

Wind speed button

While the device is working, press the Wind speed button to adjust the wind speed: Low-Medium-Hight. The corresponding indicator light will turn on. Every time the Wind speed button is pressed, the device will beep once.

Timer button

While the device is working, press the Timer button to select the operating time: 2H-4H-8H-continuous. The corresponding indicator will turn on. The machine will enter Standby mode after the countdown is over. Every time the Timer button is pressed, the device will beep once.

Light button (Sleep mode)

While the device is working, press the Light button to adjust the light as desired: Standard-Soft-Off. Every time the Light button is pressed, the device will beep once.

Filter replacement reminder button

While the device is working, when the machine detects the filter is saturated after running for 2200 hours, the light indicator will keep flashing in red. Long press the Filter button for 7 seconds to stop the indicator from flashing. Reset after installing a new filter.

Note:

The device will continue to operate normally even when the reminder of replacing filter is activated.

4. CLEANING AND MAINTENANCE

• Turn off and unplug the product from the power supply before cleaning or repairing it.
• Use a soft, dry (or slightly damp) cloth with some neutral cleaning agent to clean the product's outside and prevent the accumulation of dust and dirt.
• If the product is not going to be used for a long time, store it in a safe and well-ventilated place.
• Do not use detergent, scouring pads, chemically-treated cloths, gasoline, benzene, alcohol, thinner, or other solvents, as these can scratch and damage the tank and cause water leakage.
• Do not immerse the product in water or any other liquid.
• The only filter that can be cleaned with water is the pre-filter.

Filters

Switch the device off to stop the air filter.

Unplug the device.

Take the top cover down from the top of the machine.

Remove the filter.

Clean the filter with a dry cloth or replace the filter when the filter use indicator blinks red.

Replace the top cover.

Fig. 3.

5. TECHNICAL SPECIFICATIONS

Product reference: 05656

Product: TotalPure 1400 Style

Power: 16 W

Voltage and frequency: 100-240 V\~, 50/60 Hz

Made in China | Designed in Spain

6. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), specifies that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment.

The crossed out "wheeled bin" symbol on the product reminds you of your obligation to dispose of the appliance correctly.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

7. TECHNICAL SUPPORT AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual.

The warranty will not cover the following situations:

• The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault attributable to the customer.
• The product has been disassembled, modified, or repaired by persons, not authorised by the official Technical Support Service of Cecotec.
• Faults deriving from the normal wear and tear of its parts, due to use.

The warranty service covers every manufacturing defects of your appliance for 2 years, based on current legislation, except consumable parts. In the event of misuse, the warranty will not apply.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at [phone].

1. PIÈCES ET COMPOSANTS

Purificateur d'air

Img. 1.

Made in China | Designed in Spain

6. RECYKLING SPRZĘTU AGD

Fig./Img./Abb./Afb./Rys./Obr.3

www.cecotec.es

Quart de Poblet, Valencia (Spain)

YV_02210216