DDR50B1BDB - Humidifier DANBY - Free user manual and instructions
Find the device manual for free DDR50B1BDB DANBY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dehumidifier |
| Brand | Danby |
| Model | DDR50B1BDB |
| Dehumidification Capacity | 50 pints/day (23.6 L/day) |
| Recommended Coverage | Up to 111 m² (1200 sq ft) |
| Tank Capacity | 6.1 liters |
| Dimensions (W × D × H) | 50.0 × 30.5 × 63.5 cm |
| Net Weight | 15.0 kg |
| Power Supply | 120 V ~ 60 Hz, 5.0 A |
| Rated Power | 600 W |
| Main Features | Built-in hygrostat, 24-hour timer, automatic shut-off when tank full, auto defrost, turbo mode |
| Control & Display | Touch panel with LED display, remote control included |
| Maintenance & Cleaning | Washable air filter (clean every 2 weeks), removable tank |
| Spare Parts & Repairability | Filter, tank, remote available through after-sales service |
| Safety | Anti-freeze protection, automatic shut-off when tank full, overload protection |
| Warranty | 1 year parts and labor |
| Noise Level | ~ 52 dB |
| Refrigerant Type | R-410A |
| Recommended Use | Basement, garage, bedroom, living room |
Frequently Asked Questions - DDR50B1BDB DANBY
How to install the Danby DDR50B1BDB dehumidifier?
Place the unit on a flat, stable surface, at least 30 cm from walls for proper air circulation. Plug it into a 120 V outlet. Make sure the tank is properly inserted. Turn on the unit and set the desired humidity level using the control panel.
What is the tank capacity and how to empty it?
The tank has a capacity of 6.1 liters. When full, the unit automatically stops and an indicator lights up. Remove the tank by the handle, empty it in a sink, then replace it correctly to restart.
How to clean the air filter?
The filter is located at the back of the unit. Remove it, wash it with warm soapy water, rinse and dry completely before reinstalling. Clean it every two weeks to maintain efficiency.
The dehumidifier doesn't turn on, what should I do?
Check the power connection and that the tank is properly in place. Make sure the hygrostat is not set above the ambient humidity. If the problem persists, contact customer service.
What is the auto defrost mode?
At low temperatures, frost can form on the coils. The auto defrost triggers a warming cycle to remove frost, then the unit resumes normal operation.
Can I use a continuous drain hose?
Yes, at the back of the unit there is a fitting for a hose (3/4 inch diameter). Connect a standard garden hose and direct it to a drain. Water will flow continuously without filling the tank.
What is the ideal humidity setting?
The recommended relative humidity is between 40% and 50%. Use the +/- buttons to adjust. A built-in hygrostat maintains this level automatically.
How to use the timer?
Press the Timer button. Use the arrows to set a duration from 1 to 24 hours. The unit will automatically turn off after the set time.
The dehumidifier is making noise, is this normal?
The noise level is around 52 dB, comparable to a quiet conversation. Excessive noise may indicate a dirty filter or a loose part. Check the installation.
Where to find spare parts?
Parts such as the filter, tank, or remote control are available from Danby after-sales service. Contact support or visit the official website to order.
User questions about DDR50B1BDB DANBY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Humidifier in PDF format for free! Find your manual DDR50B1BDB - DANBY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DDR50B1BDB by DANBY.
USER MANUAL DDR50B1BDB DANBY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DANBY
Model : DDR50B1BDB
Category : Humidifier