DTAC100B1WDB - Air conditioner DANBY - Free user manual and instructions
Find the device manual for free DTAC100B1WDB DANBY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Monoblock portable air conditioner |
| Brand | Danby |
| Model | DTAC100B1WDB |
| Cooling capacity | 10,000 BTU/h (approx. 2.9 kW) |
| Recommended area | Up to 30 m² (approx. 320 ft²) |
| Dimensions (H x W x D) | 67.5 x 43.5 x 36.5 cm (approx.) |
| Net weight | Approx. 28 kg |
| Power supply | 115 V ~ 60 Hz |
| Power consumption (cooling) | Approx. 950 W |
| Maximum airflow | Approx. 680 m³/h |
| Operating modes | Cooling, dehumidification, ventilation |
| Noise level (max) | Approx. 55 dB(A) |
| Built-in timer | Yes, up to 24 hours |
| Remote control included | Yes |
| Air filter | Washable foam filter |
| Maintenance and cleaning | Clean filter every 2 weeks; empty condensation tray regularly |
| Safety functions | Automatic shut-off in case of overheating or full tray |
| Spare parts and repairability | Parts available through Danby after-sales service |
| Warranty | 1 year (parts and labor) |
Frequently Asked Questions - DTAC100B1WDB DANBY
How do I install the air exhaust of the Danby DTAC100B1WDB air conditioner?
Attach the provided exhaust kit to the back of the unit, then place the end of the hose in a window or opening. Make sure the hose is as short and straight as possible for maximum efficiency.
Can I use this air conditioner in dehumidifier mode only?
Yes, dehumidification mode works without the cooling fan. It extracts moisture from the air and collects it in the condensation tray.
How do I clean the air filter on my DTAC100B1WDB?
Turn off and unplug the unit. Remove the filter located behind the front grille. Wash it with warm soapy water, rinse, and dry completely before reinstalling.
What if the condensation tray is full?
The unit automatically shuts off and a light illuminates. Empty the tray by removing it from the bottom, then replace it correctly. The light turns off and the unit restarts.
How do I set the timer?
Press the 'Timer' button on the remote control or control panel. Use the arrows to set the desired number of hours (1 to 24). Confirm by pressing 'Timer' again.
The air conditioner is not cooling enough, what should I check?
Check that the air filter is clean, the exhaust hose is not blocked or kinked, and windows/doors are closed. Also ensure the unit's capacity is appropriate for the room size.
What is the noise level during operation?
The noise level is approximately 55 dB(A) in maximum cooling mode, equivalent to a normal conversation. It can be quieter in fan mode.
Can I use an extension cord with this air conditioner?
It is not recommended to use an extension cord. Plug the unit directly into a 115 V wall outlet. If necessary, use a heavy-duty cord of at least 14 AWG.
How do I reset the error code?
Unplug the unit for 5 minutes, then plug it back in. If the code persists, contact Danby technical support.
Where can I find the serial number of my DTAC100B1WDB?
The serial number is on a label attached to the back or side of the unit. It starts with 'DTAC100' and is required for any service requests.
User questions about DTAC100B1WDB DANBY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual DTAC100B1WDB - DANBY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DTAC100B1WDB by DANBY.
USER MANUAL DTAC100B1WDB DANBY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DANBY
Model : DTAC100B1WDB
Category : Air conditioner