DPA120DBAUGDB - Air conditioner DANBY - Free user manual and instructions
Find the device manual for free DPA120DBAUGDB DANBY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Portable air conditioner |
| Brand | Danby |
| Model | DPA120DBAUGDB |
| Cooling capacity | 12,000 BTU/h |
| Recommended area | Up to 30 m² |
| Operating modes | Cool, fan, dehumidification |
| Fan speeds | 3 speeds |
| Adjustable thermostat | Yes |
| Programmable timer | Yes, up to 24 hours |
| Remote control | Yes |
| Dimensions (W x D x H) | 460 x 380 x 760 mm |
| Weight | 32 kg |
| Power supply | 220-240 V, 50/60 Hz |
| Power consumption | 1150 W |
| Refrigerant | R32 |
| Noise level | 52 dB (max) |
| Water drainage | Continuous drain or reservoir |
| Air filter | Washable |
| Sleep mode | Yes |
| Oscillation | Yes |
| Energy class | A |
| Warranty | 2 years (parts and labor) |
| Maintenance and cleaning | Clean the filter regularly; check the drain. |
| Safety | Frost protection, automatic shutdown on overheating |
| Spare parts | Filter, remote control, exhaust kit |
Frequently Asked Questions - DPA120DBAUGDB DANBY
How to clean the air filter?
Open the air intake grille, remove the filter, wash it with warm water and mild soap, dry it completely before reinstalling. Do not use abrasive products.
What to do if the appliance does not cool?
Check that the filter is clean, the air openings are not blocked, the thermostat is set below room temperature, and the exhaust hose is properly installed.
How to install the exhaust kit?
Attach the flexible hose to the rear air outlet, extend it to the window or door, and use the included window seal to seal the opening. Make sure the hose is not bent.
How to set the timer?
Press the 'Timer' button, use the arrows to set the start or stop time, then confirm. The timer can be programmed up to 24 hours.
How to use the remote control?
Insert AAA batteries into the compartment, point towards the unit's receiver. The buttons allow adjusting mode, temperature, fan speed, and timer.
What do the error codes on the display mean?
Codes like E1, E2, E3 indicate sensor faults. Consult the manual for exact meaning. If the problem persists, contact after-sales service.
How to drain the water from the reservoir?
If the reservoir is full, the unit beeps and stops. Unplug the unit, remove the drain plug at the back, empty the water into a container, then replace the plug.
Can I use the appliance without an exhaust hose?
No, the cool mode requires exhausting hot air to the outside. Always use the supplied exhaust kit for proper operation.
How to switch from cool mode to fan mode?
Press the 'Mode' button until the fan symbol appears. The fan can operate without cooling to circulate air.
Where to find spare parts?
Contact Danby after-sales service or visit the official website. Common parts like the filter, remote control, and exhaust kit are available online.
User questions about DPA120DBAUGDB DANBY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual DPA120DBAUGDB - DANBY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DPA120DBAUGDB by DANBY.
USER MANUAL DPA120DBAUGDB DANBY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DANBY
Model : DPA120DBAUGDB
Category : Air conditioner