DAC080BAUWDB - Air conditioner DANBY - Free user manual and instructions
Find the device manual for free DAC080BAUWDB DANBY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Portable air conditioner |
| Cooling capacity | 8,000 BTU (2.34 kW) |
| Maximum coverage area | Approximately 20-25 m² |
| Operating mode | Cooling, fan, dehumidification |
| Noise level | 52 dB(A) |
| Dimensions (W × H × D) | 45 × 70 × 35 cm |
| Weight | 25 kg |
| Power supply | 115 V, 60 Hz |
| Power consumption (cooling) | 900 W |
| Airflow | 250 CFM |
| Water tank capacity | 1.5 L (auto-evaporation) |
| Filter type | Washable filter |
| Remote control | Yes |
| Timer | 24 hours |
| Energy efficiency class (EER) | 10.0 |
| Refrigerant | R-410A |
| Warranty | 2 years (parts and labor) |
| Sleep mode | Yes |
| Dehumidification mode | Yes |
| Casters | Yes |
| Window installation kit | Included |
Frequently Asked Questions - DAC080BAUWDB DANBY
How to install the Danby DAC080BAUWDB air conditioner?
Place the unit near a window. Attach the provided installation kit to the window, then connect the hot air exhaust hose. Plug the unit into a 115 V outlet. Refer to the user manual for more details.
How to clean the air filter?
Turn off and unplug the unit. Remove the filter located at the back or side. Wash it with warm soapy water, rinse, and dry completely before reinstalling. Clean the filter every two weeks for optimal performance.
The remote control does not work, what should I do?
Check the batteries (replace if necessary). Make sure no obstacles block the unit's sensor. Point the remote directly at the air conditioner. If the problem persists, reset the unit by unplugging it for 5 minutes.
The air conditioner is not cooling enough, why?
Check that the filter is clean and the exhaust hose is not blocked. Make sure the room is not too large for the capacity (max 25 m²). Very high outdoor temperature may reduce efficiency. If necessary, contact customer service.
How to use the timer?
Press the Timer button on the remote or control panel. Use the + and - buttons to set the desired delay (from 1 to 24 hours). Confirm by pressing Timer again. The timer can be used to turn the unit on or off.
What is the cooling capacity of this model?
The Danby DAC080BAUWDB has a cooling capacity of 8,000 BTU, suitable for a room of about 20 to 25 m². This power effectively cools a medium-sized space.
The air conditioner produces water, is this normal?
Yes, it is normal in cooling or dehumidification mode. The unit uses an auto-evaporation system to expel humidity. If the internal tank is full, the unit stops and displays an error code. Then empty the tank manually.
How to switch to dehumidification mode?
Press the Mode button repeatedly until the water drop icon appears. The fan will run at low speed and the unit will extract moisture from the air without actively cooling. Suitable for humid rooms.
Can I use an extension cord?
Using an extension cord is not recommended as it may cause overheating or power loss. Always plug the air conditioner directly into a 115 V/15 A wall outlet. If an extension cord is necessary, use a heavy-duty cord of at least 14 AWG.
How to store the unit in winter?
Clean the filter and empty the water tank. Unplug the unit, coil the cord, and store it in a dry, frost-free place. Remove the remote batteries. Cover the unit to protect it from dust.
User questions about DAC080BAUWDB DANBY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual DAC080BAUWDB - DANBY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DAC080BAUWDB by DANBY.
USER MANUAL DAC080BAUWDB DANBY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DANBY
Model : DAC080BAUWDB
Category : Air conditioner