FFHP362CQ2 - Air conditioner FRIGIDAIRE - Free user manual and instructions
Find the device manual for free FFHP362CQ2 FRIGIDAIRE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner with Heat Pump |
| Model Number | FFHP362CQ2 |
| Cooling Capacity (BTU) | 36,000 |
| Heating Capacity (BTU) | 12,000 |
| Voltage | 230V / 60Hz |
| Amperage | 15 A |
| Power Cord Length | 6 ft |
| Dimensions (W x D x H) | 28.5 x 20.5 x 38.5 inches |
| Weight | 105 lbs |
| Refrigerant Type | R-32 |
| Energy Efficiency Ratio (EER) | 10.5 |
| Fan Speeds | 3 (Low, Medium, High) |
| Remote Control | Yes |
| Timer | 24-hour programmable |
| Air Direction | Auto swing louver |
| Filter Type | Washable mesh filter |
| Filter Cleaning Interval | Every 2 weeks |
| Condensate Removal | Self-evaporating (most conditions) |
| Window Kit Included | Yes, for horizontal sliding windows |
| Safety Features | Overload protection, auto restart |
| Repairability | User-replaceable filter, professional service for refrigerant |
Frequently Asked Questions - FFHP362CQ2 FRIGIDAIRE
How do I clean the filter on my Frigidaire FFHP362CQ2?
Turn off and unplug the unit. Remove the filter grille and slide out the washable mesh filter. Rinse with water and mild detergent, let dry completely before reinstalling. Clean every 2 weeks.
What does the 'FFHP' in the model number stand for?
FFHP stands for Frigidaire Heat Pump, indicating this unit provides both cooling and heating capabilities.
Why is my air conditioner not cooling properly?
Check if the filter is dirty and clean it. Ensure all windows and doors are closed. Verify that the unit is not in fan-only mode. Also, make sure the set temperature is lower than the room temperature.
How do I use the timer function?
Press the Timer button on the remote or control panel. Use the +/- buttons to set the desired shut-off time (0.5 to 24 hours). Press again to confirm. The timer will automatically turn off the unit after that period.
Do I need to drain water from the unit?
The FFHP362CQ2 features self-evaporating technology. In normal humidity conditions, most moisture is evaporated. However, in very humid areas, you may need to attach a drain hose to the continuous drain port.
What is the required electrical setup?
This unit requires a dedicated 230V, 15A outlet. Do not use an extension cord. It uses a NEMA 6-15P plug. If your outlet is different, consult an electrician.
How do I install the window kit?
Slide the window kit panels apart to fit your window width (27–47 inches). Place the kit in the window opening, lower the window sash onto it, and secure using the provided screws. Then attach the exhaust hose to the unit and the kit.
Why is the remote control not working?
Replace the AAA batteries in the remote. Ensure no obstructions between the remote and the unit's receiver. Point directly at the unit from within 20 feet.
Can I use the air conditioner in heating mode during winter?
Yes, the heat pump can provide heat down to 41°F (5°C) outdoor temperature. For colder climates, it is not recommended as primary heat source.
How do I reset the unit?
Unplug the unit for 5 minutes, then plug it back in. This resets the control board. If the problem persists, check the circuit breaker and ensure no overload.
User questions about FFHP362CQ2 FRIGIDAIRE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual FFHP362CQ2 - FRIGIDAIRE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FFHP362CQ2 by FRIGIDAIRE.
USER MANUAL FFHP362CQ2 FRIGIDAIRE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FRIGIDAIRE
Model : FFHP362CQ2
Category : Air conditioner