FFRA082WAE - Air conditioner FRIGIDAIRE - Free user manual and instructions
Find the device manual for free FFRA082WAE FRIGIDAIRE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Window Air Conditioner |
| Model | FFRA082WAE |
| Brand | Frigidaire |
| Cooling Capacity | 8,000 BTU |
| Room Size Coverage | Up to 350 sq ft |
| Power Supply | 115 V, 60 Hz |
| Amperage | 6.5 A |
| Energy Efficiency Ratio (EER) | 12.0 |
| Dimensions (W x H x D) | 24 in x 15.5 in x 13 in |
| Weight | 55 lbs |
| Noise Level (dB) | 50 - 60 dB |
| Remote Control | Yes |
| Modes | Cool, Fan, Energy Saver, Sleep |
| Fan Speeds | 3 (Low, Medium, High) |
| Air Direction | Adjustable louvers, 4-way |
| Filter Type | Washable mesh filter |
| Filter Cleaning | Every 2 weeks, wash with mild detergent, dry before reinstalling |
| Drainage | Self-evaporating system, may require manual drainage in high humidity |
| Installation Type | Window or wall sleeve |
| Safety Features | Anti-bacteria filter, child lock (via remote) |
| Warranty | 1 year limited parts and labor |
| Refrigerant | R-32 |
| Timer | 24-hour on/off timer |
Frequently Asked Questions - FFRA082WAE FRIGIDAIRE
How often should I clean the filter on my Frigidaire FFRA082WAE?
Clean the washable filter every 2 weeks during peak usage. Remove the filter, wash with mild soap and water, ensure it's completely dry before reinstalling.
What is the correct way to install the FFRA082WAE in a window?
The unit requires a double-hung window with a minimum width of 24 inches. Use the included installation kit, secure the side panels, and tilt the unit slightly downward for proper drainage. Ensure the window is locked for safety.
Why is my air conditioner not cooling properly?
Check if the filter is dirty and clean it. Ensure the thermostat is set lower than room temperature. Verify the unit is not obstructed and windows/doors are closed. Also, the room may be larger than the unit's recommended coverage (350 sq ft).
Does the FFRA082WAE require a dedicated electrical circuit?
It is recommended to use a 115V dedicated circuit to prevent tripping breakers. Avoid using an extension cord. The unit draws about 6.5 amps.
How do I use the energy saver mode?
Press the 'Energy Saver' button on the remote or control panel. In this mode, the fan shuts off when the compressor cycles off, saving energy. The fan will run periodically to monitor room temperature.
What does the 'Sleep' mode do?
Sleep mode gradually increases the temperature setting by up to 2°F over the night to prevent overcooling while you sleep. It also adjusts the fan speed for quieter operation.
Can I install this air conditioner in a wall sleeve?
Yes, the FFRA082WAE is compatible with a wall sleeve. Ensure the sleeve is sized correctly (24x15.5 inches) and follow the user manual for secure installation and sealing.
Why does my unit leak water inside?
Internal water leaks often occur if the unit is not tilted slightly downward (about 1/4 bubble on a level) toward the outside. Also, check if the drain hole is clogged. Clean any debris from the base pan.
How to reset the error code on the FFRA082WAE?
Unplug the unit for 10 minutes to reset the electronics. If an error persists, check for blocked airflow or dirty filter. Refer to the manual for specific error code meanings.
What is the warranty coverage for this air conditioner?
The FFRA082WAE comes with a 1-year limited warranty covering parts and labor for defects in materials or workmanship. Register your product at Frigidaire.com for warranty activation.
User questions about FFRA082WAE FRIGIDAIRE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual FFRA082WAE - FRIGIDAIRE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FFRA082WAE by FRIGIDAIRE.