FRIGIDAIRE

FFHP093WS2 - Air conditioner FRIGIDAIRE - Free user manual and instructions

Find the device manual for free FFHP093WS2 FRIGIDAIRE in PDF.

📄 27 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice FRIGIDAIRE FFHP093WS2 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Window Air Conditioner with Heat Pump
Model FFHP093WS2
Cooling Capacity (BTU) 9,000
Heating Capacity (BTU) 9,000 (heat pump)
Coverage Area (sq. ft.) Up to 450
Dimensions (W x H x D) 22 x 15.5 x 17.5 inches
Weight (lbs) 54
Power Supply 115 V, 60 Hz
Amperage 7.5 A
Refrigerant R-410A
Energy Efficiency Ratio (EER) 12.1
Cooling Modes Auto, Cool, Fan, Heat, Dry
Fan Speeds 3 (Low, Medium, High)
Filter Type Washable Mesh Filter
Remote Control Included
Noise Level (dB) 52 (approx.)
Energy Star Certified Yes
Warranty 1 year parts and labor
Installation Type Window mount, slide-out chassis

Frequently Asked Questions - FFHP093WS2 FRIGIDAIRE

How do I clean the filter on my Frigidaire FFHP093WS2?
Turn off and unplug the unit. Remove the front grille, slide out the filter, and wash it with warm water and mild detergent. Allow to dry completely before reinstalling. Clean every 2 weeks during heavy use.
What size room can the FFHP093WS2 cool?
This 9,000 BTU air conditioner is designed for rooms up to 450 square feet.
Does this unit have a heat pump?
Yes, the FFHP093WS2 is a heat pump model that provides both cooling and heating.
How do I use the remote control?
Insert two AAA batteries (not included). Point the remote at the unit's receiver. Use the MODE button to cycle through Cool, Heat, Fan, Dry, and Auto. Adjust temperature with +/- buttons.
Why is my air conditioner leaking water?
Check for a clogged drain. The unit may need to be tilted slightly backward for proper drainage. Also ensure the filter is clean. In high humidity, some water on the floor is normal; use a drain hose if necessary.
How do I install the FFHP093WS2 in a window?
Refer to the manual for full steps. Generally, lift the unit into the window opening, extend the side panels, secure with brackets, and seal gaps. Ensure the window can support the weight (54 lbs).
What does the 'Auto' mode do?
In Auto mode, the unit automatically selects cool, heat, or fan only based on the set temperature and room conditions. The fan speed adjusts automatically.
Can I use an extension cord?
No. Plug the unit directly into a grounded 115V outlet. Extension cords can cause voltage drop and overheating, posing a fire hazard.
How do I reset the filter reminder?
After cleaning the filter, press and hold the Filter Reset button (or a combination of buttons depending on model) for 3 seconds until the indicator light turns off. Consult manual for exact procedure.
Where can I download the user manual?
You can download the manual for free from notice-facile.com or the Frigidaire official website. Enter the model FFHP093WS2 to find the PDF.

User questions about FFHP093WS2 FRIGIDAIRE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Air conditioner in PDF format for free! Find your manual FFHP093WS2 - FRIGIDAIRE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FFHP093WS2 by FRIGIDAIRE.

USER MANUAL FFHP093WS2 FRIGIDAIRE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : FRIGIDAIRE

Model : FFHP093WS2

Category : Air conditioner