XpressKit 506T - Remote control Viper - Free user manual and instructions
Find the device manual for free XpressKit 506T Viper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Remote control |
| Brand | Viper |
| Model | XpressKit 506T |
| Category | Car security remote |
| Power Source | 1 x CR2032 3V lithium battery |
| Dimensions (approx) | 2.5 x 1.5 x 0.6 inches |
| Weight (with battery) | 1.2 oz |
| Operating Frequency | 433 MHz or 315 MHz (check local) |
| Range | Up to 1 mile (line of sight) |
| Key Functions | Arm, Disarm, Panic, Remote Start, Trunk Release |
| Display | LCD with 2-way confirmation |
| Water Resistance | Not waterproof, avoid moisture |
| Operating Temperature | -20°C to 60°C |
| Battery Life | Approximately 12 months under normal use |
| Compliance | FCC Part 15, IC RSS-210 |
| Programming | Requires vehicle-specific procedure (see manual) |
| Case Material | ABS plastic with rubberized coating |
| Included Accessories | Remote, battery, user manual |
| Maintenance | Clean with a soft, dry cloth. Do not use solvents. |
| Safety Warnings | Keep away from children under 3. Do not swallow battery. |
| Spare Parts Available | Battery (CR2032), replacement remote (programming required) |
Frequently Asked Questions - XpressKit 506T Viper
How do I replace the battery in my Viper XpressKit 506T remote?
Slide the battery cover off (usually at the back), remove the old CR2032 battery and insert a new one with the + side up. Reattach the cover. Test the remote.
What is the range of the XpressKit 506T?
Line-of-sight range is up to 1 mile (1.6 km), but obstacles like buildings can reduce it significantly.
How do I program the remote to my vehicle?
Programming usually requires entering the vehicle’s programming mode (e.g., turning ignition on/off). Refer to your vehicle’s or alarm system’s manual for specific steps.
The remote stopped working. What should I check?
First, try replacing the battery. If that doesn’t work, ensure the remote is programmed to the vehicle. If still issues, the remote may need replacement.
Is the remote waterproof?
No, it is not waterproof. Avoid exposure to rain, submersion, or high humidity. If wet, dry immediately with a soft cloth.
Can I use this remote with any Viper system?
The XpressKit 506T is designed for specific Viper systems. Check compatibility with your alarm or remote start model before use.
What does the 2-way LCD display show?
It confirms commands (e.g., arm/disarm) and shows vehicle status like door locks, trunk, or remote start activation.
How do I reset the remote?
Usually, removing the battery for 10 seconds and reinserting it will reset the remote. Reprogramming may be required.
Why does the remote have a FCC ID?
The FCC ID indicates that the device complies with FCC regulations. It helps identify the device for compliance and troubleshooting.
Where can I purchase a replacement remote?
Replacement remotes can be bought from authorized Viper dealers or online retailers. Ensure it's the correct model and plan for programming.
User questions about XpressKit 506T Viper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote control in PDF format for free! Find your manual XpressKit 506T - Viper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XpressKit 506T by Viper.
USER MANUAL XpressKit 506T Viper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Viper
Model : XpressKit 506T
Category : Remote control