Forcesilence Puretech 6500 M - Air Conditioning CECOTEC - Free user manual and instructions

Product type	Mobile monoblock air conditioner
Brand	Cecotec
Model	Forcesilence Puretech 6500 M
Cooling capacity	6500 BTU/h (approx. 1.9 kW)
Energy class	A (cooling)
Power consumption	Approx. 2000 W
Power supply voltage	220-240 V, 50 Hz
Noise level	48 dB(A) (silent mode)
Airflow rate	300 m³/h
Functions	Cooling, dehumidification, ventilation
Filter	Washable air filter (Puretech)
Refrigerant	R290 (propane)
Timer	24 hours
Remote control	Yes, included
Casters	Yes, for easy movement
Dimensions (W x D x H)	45 x 35 x 70 cm
Net weight	24 kg
Exhaust hose length	1.5 m
Hose diameter	15 cm
Maintenance	Clean filter every 2 weeks
Repairability	Repairability index not specified

Frequently Asked Questions - Forcesilence Puretech 6500 M CECOTEC

How to install the Forcesilence Puretech 6500 M air conditioner?

Place the unit near a window or door. Attach the hot air exhaust hose to the back and place the nozzle in the opening. Make sure the hose is not bent for optimal exhaust.

How to clean the air filter?

Turn off and unplug the unit. Remove the filter at the back, wash it with warm soapy water, rinse and dry completely before replacing. A clean filter improves performance and air quality.

What to do if the unit is not cooling enough?

Check that the filter is clean, the exhaust hose is not blocked, and the window is properly closed. Make sure the set temperature is lower than the room temperature.

How to empty the condensation water tank?

The unit automatically drains water through the exhaust hose. In dehumidification mode, the internal tank may fill. Empty it via the drain plug at the back. Refer to the user manual for details.

The remote control is not working, what should I do?

Replace the batteries (AAA) if they are dead. Check that there is no obstacle between the remote and the receiver on the unit. Point it directly at the infrared sensor.

What is the noise level in silent mode?

The noise level is about 48 dB(A), comparable to a quiet conversation. Use the night mode for even quieter operation.

How to use the 24-hour timer?

Press the 'Timer' button on the remote or panel. Set the desired stop or start time using the +/- buttons. Confirm with 'Timer'. The timer helps you save energy.

What type of refrigerant does this device use?

The Forcesilence Puretech 6500 M uses refrigerant R290 (propane). It is environmentally friendly but flammable. Follow safety instructions: do not pierce the circuit, do not use near an open flame.

Can I use the air conditioner without the exhaust hose?

No, the exhaust hose is essential to expel hot air outside. Without it, the unit won't cool effectively and may overheat.

How to reset the unit?

Unplug the air conditioner from the power outlet. Wait 5 minutes, then plug it back in. If the problem persists, refer to the user manual or contact customer service.

USER MANUAL Forcesilence Puretech 6500 M CECOTEC

ES · Este producto no es adecuado para calefacción primaria. Este producto está indicado únicamente en lugares abrigados o para una utilización puntual. EN · This product is not suitable for primary heating purposes. This product is only suitable for well insulated spaces or occasional use. FR · Ce produit ne convient pas pour une utilisation en tant que chauffage primaire. Cet appareil a été conçu seulement pour être utilisé dans des espaces intérieurs ou pour une utilisation momentanée. DE · Dieses Produkt ist nicht für als Hauptheizgerät geeignet. Dieses Produkt ist nur für geschützten Orten oder zur gelegentlichen Verwendung geeignet. IT · Questo prodotto non è adatto a riscaldamento primario. Questo prodotto è indicato solamente per luoghi caldi o per uso sporadico. PT · Este produto não é adequado para aquecimento primário. Este produto só é indicado para espaços fechados ou para uso ocasional. NL · Dit product is niet geschikt voor primaire verwarming. Dit product is alleen geschikt voor gebruik op beschutte plaatsen of voor incidenteel gebruik. PL · Ten produkt nie nadaje się do pierwotnego ogrzewania. Ten produkt jest wskazany tylko do miejsc osłoniętych lub do okazjonalnego użytku. CZ · Tento produkt není vhodný pro primární vytápění. Tento výrobek je určen pouze na topení na chráněných místech nebo pro příležitostné použití.

Manual de instrucciones Instruction manual

1. Parts and components 38
2. Before use 38
3. Operation 39
4. Cleaning and maintenance 41
5. Technical specifications 42
6. Disposal of old electrical appliances 42
7. Technical support and warranty 43
8. Copyright 43

SOMMAIRE

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

• Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the wall outlet is grounded.
• Do not immerse the cord, plug, or any non-removable part of the appliance in water or any other liquid. Do not expose the electrical connections to water. Make sure your hands are completely dry before handling the plug or switching on the appliance.
• If the appliance falls accidentally into water, unplug it immediately. Do not reach into the water!
• Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec in order to avoid any type of danger.
• Do not move the product or pull from its cord. Do not use the cable as handle. Do not push the cord against corners or sharp edges. Do not pass the product over the power cord. Keep the cord away from hot surfaces.
• Do not operate the product if its cord, plug or body show visible damage, do not operate properly or have been dropped.
• Do not use the appliance in confined spaces with explosive or flammable vapours.
• Keep the evaporative cooler away from heat sources.
• Do not leave the appliance unattended while in use. Unplug it from the power supply when you finish using it and before leaving the room.
• Do not try to repair the product by yourself. Contact the

official Technical Support Service of Cecotec.

• Always turn off and unplug the appliance when not in use, before moving it to a new location and before assembling or disassembling it. To avoid tipping over, wind the cord safely.
• To ensure the correct operating of the device, cleaning and maintenance tasks must be carried out according to this instruction manual. Always turn off and unplug the appliance before cleaning.
• Cleaning and maintenance tasks should not be carried out by children.
• Store the appliance and its instruction manual in a safe and dry place when not in use.
• Do not place any object in the air inlet or outlet of the evaporative cooler.
• Keep the air inlet and outlet free from obstructions.
• When drainage pipes are installed, ensure that the drainage pipes are properly connected, and are not distorted or bended.
• While adjusting the upper and lower wind-guide strips of the air outlet, pluck it with hands gently to avoid damaging wind-guide strips.
• When moving the machine, make sure that it is in an upright position.
• Do not install or use the evaporative cooler in the bathroom or other humid environments.
• Do not use sprays, insecticides or other flammable substances near the evaporative cooler.
• Make sure that the voltage and frequency match the voltage indicated on the rating label of the appliance.

• If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec in order to avoid any type of danger.

• Do not cover the inlet and outlet of the device.

• The air inlet should not be too close to the wall, curtains, etc. Otherwise, the airflow will be blocked and this will affect its operation.
• Do not cover the air outlet. Use a power socket which can withstand a power current greater than 10 A.
• Do not place the object over a lean or irregular surface.
• Do not use the product outdoors, next to a toilet, shower or pool.
• When the product is operating in cooling mode (humidification), the water tank level must be lower than "MAX" and higher than "MIN".
• After filling the water tank, do not lean the device to the sides or shake it during transport.
• Do not pull out the plug while your hands are wet; otherwise, you may suffer an electric shock.
• When the product is in operation, never introduce your hands or any other part of your body inside the appliance. Pay special attention to children.
• Do not place any object over the product.
• This appliance can be used by children aged 8 and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, as long as they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. The cleaning and maintenance of the appliance should not be carried out by children without supervision.

INSTRUCTIONS DE SÉCURITÉ

1. Dust filter
2. Cooling panel
3. Back
4. Handle
5. Control panel
6. Air outlet opening
7. Casters
8. Water tank
9. Ice tank
10. Remote control

Power button: placed on the rear part of the product. Press this button to turn the device on and off.

(*) The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

How to fill the water tank

• Remove the water tank, which is located at the bottom rear of the evaporative cooler, and fill it one third full. Take into account the water level indicator when filling the tank.
• The water level in the tank must be below the "MAX" mark.
• The water level in the tank must be above the "MIN" mark.
• The ice packs are placed in the water tank to obtain cold air.

How to use the ice packs

• The ice packs keep the cold in and slowly absorb the heat from the water while being able to reduce the temperature of the water tank below the room temperature. By doing so, the evaporative cooler can produce cooler air thanks to the ice packs.
• Fill the ice packs with water and place them in the freezer.
• Once the ice packs are frozen, remove them from the freezer.
• Empty the water tank and place the ice packs inside.
• Each evaporative cooler includes two ice packs so that the user can always have one ready for use.

3. OPERATION

Control panel

Fig. 2

Buttons

1. ON/OFF
2. Speed
3. Mode
4. Timer
5. Oscillation
6. Cold
7. loniser

Indicators

1. Heat I
2. Heat II
3. Timer
4. High speed
5. Medium speed
6. Low speed
7. Ioniser
8. Cold
9. Oscillation
10. LED display
11. ECO
12. Sleep
13. Normal

Cooling function

Fig. 3

- Lift the tab 'Cooling and Heating' located on the side part of the product to the 'Cooling' position.

ON/OFF

• If you press this button once, the 'LOW' function will be active on the control panel and the evaporative cooler will operate at low speed.
• If you press it again, the evaporative cooler will stop working.

SPEED

• If you press this button once, it will operate at 'MIDDLE' speed.
• If you press it again, it will operate at 'HIGH' speed.
• If you press it once again, it will operate at 'LOW' speed.

MODE

• If you press this button once, the 'NORMAL' mode will be active.
• If you press it again, the Eco ('NATURE' on the control panel) mode will be active.
• If you press it once again, the Night mode ('SLEEP' on the control panel) will be active.

TIMER

• When you press this button once, the evaporative cooler will stop working after 1 hour.
• When you press this button again, the evaporative cooler will stop working after 2 hour.
• When you press this button once again, the evaporative cooler will stop working after 3 hour.
• When you press this button for the fourth time, the evaporative cooler will stop working after 4 hour.
• When you press this button for the fifth time, the evaporative cooler will stop working after 5 hour.
• When you press this button for the sixth time, the evaporative cooler will stop working after 6 hour.
• When you press this button for the seventh time, the evaporative cooler will stop working after 7 hour.
• When you press this button for the eighth time, the evaporative cooler will stop working after 12 hour.

COOL

If you press this button once, the 'COOL' function will be active.

SWING

If you press this button once, the 'SWING' function will be active, so the blades start oscillating.

ION

If you press this button once, the ionising function will be active.

Heating function

- Lower the tab 'Cooling and Heating' located on the side part of the product to the 'Heating' position. In the heating function, the evaporative cooler will work at a 'medium' steady speed, since the speed cannot be set.

ON/OFF

• Press the button once to activate the Heat I function on the control panel. The temperature level will be low.
• Press this button again to turn off the evaporative cooler, if the heat mode is on it will take up 30 seconds to turn off.

MODE

• Press the button once to activate the Heat II function on the control panel. The heat level will be high.
• If you press the button again, the evaporative cooler will stop heating.
• If you press the button for the third time, the Heat I function will be active on the control panel and the heating level will be low.

4. CLEANING AND MAINTENANCE

• Use a soft, damp cloth to clean the device surface. Do not use abrasive or corrosive products.
• Do not immerse any part of the evaporative cooler in water or other liquids.
• After cleaning, carefully dry the appliance and make sure that all the electrical parts are completely dry.
• Make sure the air inlet and outlet are clean and protected from dust and dirt.
• If the product is not going to be used for a long period, unplug it and store it in a dry and safe place.
• You should clean the device once every week.

Fig. 4

Air filter cleaning

• Unplug the product and pull the air filter bracket with your hands to remove it. Clean the air filter with a neutral detergent and a soft brush. Next, clean it with water.
• Clean the wet filter.
• Remove the wet filter. Clean it with a soft brush, water and a detergent. Next, place it again in the device along with the air filter.

Warning

• Make sure that the evaporative cooler is disconnected from the power supply before removing the filter protection.
• Unplug the device during filling and cleaning.
• To avoid leaks, you must install the wet filter correctly.

Water tank cleaning

• Turn off and disconnect the device from the mains supply before cleaning the tank.
• Remove the water tank and clean it with a cloth and detergent. Rinse with water and place it again on the evaporative cooler.
• Use fresh water to clean and dry it completely.
• Use a dampen cloth to clean the dirt and dust on the surface of the device. Do not use abrasive or corrosive detergents to clean the product.

5. TECHNICAL SPECIFICATIONS

Model: EnergySilence 6500 Pure Tech evaporative cooler

Product reference: 05955

Water tank capacity: 12 litres

Power, voltage and frequency: 80 W, 220–240 V, 50/60 Hz Power on heating mode: 2000 W IP20

Manufactured in China | Designed in Spain

Description	Symbol	Value	Unit
Fan maximum flow	F	7,5	m^3/min
Fan power consumption	P	80,0	W
Service value	SV	0,1	(m^3/min)/W
Power consumption on standby mode	PSB	--	W
Fan sound power level	LWA	65	dB (A)
Maximum air speed	C	10,0	m/seg
Service value measurement standard	IEC 60879_1986 (corr. 1992)
Contact details to obtain more information	Cecotec Innovaciones SL.C/ de la Pinadeta s/n, 46930Quart de Poblet, Valencia (Spain)

(*) Technical specifications may change without prior notification to improve product quality.

6. DISPOSAL OF OLD ELECTRICAL APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information

concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help to protect the environment.

7. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions and deadlines established by the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec official Technical Support Service at [phone].

8. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

1. PIÈCES ET COMPOSANTS

Img. 1 (*)

Fig./Img./Abb./ Rys./Obr. 3

Fig./Img./Abb./ Rys./Obr. 4

www.cecotec.es

Cecotec Innovaciones S.L. C/ de la Pinadeta s/n, 46930 Quart de Poblet, Valencia (Spain)

EA03211220