G 14DL - Grinder HITACHI - Free user manual and instructions
Find the device manual for free G 14DL HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Branch Shredder |
| Brand | Hitachi |
| Model | G 14DL |
| Power Supply | 14.4V Lithium-ion battery |
| Max Cutting Capacity | 25 mm (branch diameter) |
| Cutting System | Tempered steel blade |
| No-load Speed | 3,000 rpm |
| Weight (without battery) | 4.5 kg |
| Dimensions (L × W × H) | 45 × 30 × 25 cm |
| Noise Level | 95 dB(A) |
| Collection Bag Capacity | 30 L |
| Runtime (with 2.0 Ah battery) | 20 min |
| Charging Time | 60 min |
| Safety | Two-hand switch, overload protection |
| Maintenance | Clean blades after each use, lubricate quarterly |
| Warranty | 2 years |
| Included Accessories | 2.0 Ah battery, charger, collection bag, push stick |
Frequently Asked Questions - G 14DL HITACHI
How to change the blade of the Hitachi G 14DL shredder?
Disconnect the battery. Remove the protective cover by unscrewing the screws. Unhook the old blade and install the new one respecting the cutting direction. Close the cover. Always use genuine Hitachi blades.
What type of battery to use with the G 14DL?
Use exclusively Hitachi 14.4V lithium-ion batteries from the BSL14xx range. A higher capacity battery (3.0 Ah or 5.0 Ah) increases runtime but remains compatible.
What regular maintenance is required?
Clean the blades and the ejection chute after each use. Lubricate moving parts with light oil every 3 months. Check the condition of the screws and tighten them if necessary.
What to do if the shredder does not start?
Check that the battery is charged and properly inserted. Make sure the two-hand switch is operated simultaneously. If the problem persists, clean the battery contacts or consult an authorized service center.
Can you shred wet branches?
Yes, but with caution. Wet branches can stick and slow down cutting. Cut the branches into small pieces and clean the ejection chute more frequently to avoid jams.
How to clean the G 14DL shredder?
Remove the battery. Use a dry brush to remove plant residues. Never use water. For the blades, wipe them with an oiled cloth. Check that the ventilation slots are clear.
What safety features are built-in?
The shredder has a two-hand switch to prevent accidental start-up, overload protection that cuts the motor in case of blockage, and a blade guard.
How to store the shredder in winter?
Clean it thoroughly, remove the battery (store it at room temperature), and store the shredder in a dry, frost-free place. Lightly oil the blades to prevent rust.
Can I use a battery from another brand?
No, this would damage the device and void the warranty. Use only Hitachi 14.4V batteries.
Batteries from other brands may have incompatible electrical characteristics.
Batteries from other brands may have incompatible electrical characteristics.
Where to find spare parts for the G 14DL?
Contact an authorized Hitachi dealer or visit the official Metabo HPT website (formerly Hitachi). Common parts (blades, ratchets, springs) are available under original reference numbers.
User questions about G 14DL HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grinder in PDF format for free! Find your manual G 14DL - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G 14DL by HITACHI.
USER MANUAL G 14DL HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : G 14DL
Category : Grinder