G 13SN - Grinder HITACHI - Free user manual and instructions
Find the device manual for free G 13SN HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Angle grinder (grinder) |
| Brand | Hitachi |
| Model | G 13SN |
| Disc diameter | 125 mm |
| Rated power | 1300 W |
| Supply voltage | 230 V ~ 50 Hz |
| No-load speed | 10,000 rpm |
| Weight | 2.1 kg |
| Dimensions (L x W x H) | 265 x 130 x 100 mm |
| Power supply type | Mains, corded |
| Main functions | Restart protection, soft start, spindle lock |
| Maintenance and cleaning | Clean ventilation slots regularly, replace carbon brushes |
| Safety | Wear safety goggles, do not use without protective guard |
| Spare parts available | Discs, guards, brushes, switch, flanges |
| Repairability (score) | 7/10 |
Frequently Asked Questions - G 13SN HITACHI
Which disc to use on the G 13SN angle grinder?
Use a disc with diameter 125 mm and bore 22.23 mm. For cutting metal, choose a cutting disc; for grinding, a grinding disc. Check the maximum speed (at least 10,000 rpm).
How to change the disc?
Unplug the tool. Press the spindle lock button, unscrew the flange with the supplied wrench. Replace the disc, screw back on and release the lock.
What to do if the grinder does not start?
Check the power supply, cable and socket. If the restart protection light is on, the grinder is in safety mode: turn off and restore power. If the problem persists, contact an authorized repairer.
How to clean the grinder?
Unplug the tool. Clean the ventilation slots with a soft brush or compressed air. Wipe the housing with a damp cloth (no solvents). Clean the carbon brushes regularly.
What is the power consumption?
The rated power is 1300 W. Under 230 V, this corresponds to approximately 5.7 A. Use an appropriate socket and a 16 A circuit breaker.
Can the grinder be used without a guard?
No, the protective guard is mandatory for safety. It protects against projections and shards in case of disc breakage. Never use without a guard.
How to replace the carbon brushes?
Unplug the tool. Locate the brush holders on the sides, unscrew them, remove worn brushes (less than 5 mm) and insert new ones. Screw back on. Brushes are available as spare parts.
What to do in case of abnormal noise?
Immediately stop the tool and unplug it. Check the condition of the disc, flanges and spindle. If the noise persists, have it inspected by a professional (worn bearings).
What is the repairability score?
The repairability score is estimated at 7/10, because spare parts (brushes, switch, etc.) are readily available and disassembly is simple.
How to store the grinder?
Store it in a dry place, away from dust, preferably in its original case. Remove the disc and coil the cable without forcing it.
User questions about G 13SN HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grinder in PDF format for free! Find your manual G 13SN - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G 13SN by HITACHI.
USER MANUAL G 13SN HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : G 13SN
Category : Grinder