XS-GT6930 - Car Speaker SONY - Free user manual and instructions
Find the device manual for free XS-GT6930 SONY in PDF.
| Product Type | Car Speaker |
| Brand | Sony |
| Model | XS-GT6930 |
| Speaker Size | 6 x 9 inches |
| Speaker Type | 3-way coaxial |
| Peak Power Handling | 400 Watts |
| RMS Power Handling | 60 Watts |
| Impedance | 4 Ohms |
| Frequency Response | 30 Hz – 25,000 Hz |
| Sensitivity | 93 dB |
| Woofer Material | Mica Reinforced Cellular (MRC) cone |
| Tweeter Type | Balanced polymer dome |
| Mounting Depth | 3 inches (76 mm) |
| Mounting Cutout Diameter | 6.1 x 8.9 inches (155 x 226 mm) |
| Weight per Speaker | 1.8 kg (approx.) |
| Power Supply | 12V DC (car battery) |
| Features | High sensitivity, wide frequency range, durable cone design |
| Maintenance & Cleaning | Clean with a dry soft cloth; avoid moisture and solvents |
| Safety | Do not expose to water; ensure secure mounting |
| Repairability / Spare Parts | Contact Sony service center; no user-serviceable parts |
| General Information | Designed for car audio systems; compatible with most vehicles |
Frequently Asked Questions - XS-GT6930 SONY
User questions about XS-GT6930 SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Car Speaker in PDF format for free! Find your manual XS-GT6930 - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XS-GT6930 by SONY.
USER MANUAL XS-GT6930 SONY
Speaker Coaxial 3-way:
Woofer 16 · 24 cm cone
type
Midrange 6.6 cm cone type
Tweeter 2.5 cm balance
dome type
Maximum input power 200 watts
Rated input power 40 watts
Impedance 4 ohms
Sensitivity 92 dB/W/m
Frequency response 28 - 26,000 Hz
Mass Approx. 1,150 g per
speaker
Design and specifications are subject to change without notice.
Especificaciones
- Do not continuously use the speaker system beyond the maximum power handling capacity.
- Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system to protect them from damage caused by the magnets in the speakers.
If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony dealer before mounting.
Precauciones
Sony Corporation 2002 Printed in Thailand
Dimensions
Dimensiones
尺寸
Unit: mm
Unidad: mm
單位:mm



Before mounting
A depth of at least 77mm is required for flush mounting. Measure the depth of the area where you are to mount the speaker, and ensure that the speaker is not obstructing any other components of the car. Keep the following in mind when choosing a mounting location:
- Make sure that nothing is obstructing around the mounting location of the rear tray where you are to mount the speaker.
- A hole for mounting may already be cut out of the inner panel of the rear tray. In this case, you need to modify the board only.
- If you are to mount this speaker system in the rear tray, make sure that the speaker terminals, frame or magnet do not touch any inner parts of the car, such as the torsion bar springs (when you open or close the trunk lid), etc. Also make sure that the speaker grille does not touch any inner fittings, such as seat belts, head rests, center brake lights, inner covers of the rear wipers, curtains or air purifiers etc.
Antes del montaje
Mark the four bolt holes and make them 3.3 mm* in diameter.

