KS 66 - Circular saw METABO - Free user manual and instructions

USER MANUAL KS 66 METABO

THE NUMBER ONE CHOICE FOR THE PROFFESSIONAL The Metabo circular saw range is built for outright precision and quality. Built tough for the demands of the professional, machines with long life motors, safety clutches, large rip fences, solid all metal gear housings, riving knifes and quick cut blades fitted as standard are available within the range. Metabo. Work. Don't play.

EQUIPMENT FEATURES Carbide circular saw blade for sawing after initial cut Rubber-coated handle Suitable for bevel cuts up to 47° Safety lock switch to prevent unintentional start of the machine Built-in collector fan to prevent overheating Sturdy aluminum die cast saw housing External dust extraction outlet Ideal handling by ergonomic design especially high sawing capacity per battery pack Easy saw blade replacement with spindle lock Fully closed guide plate for secure support Precisely adjustable and well visible cutting indicator COMMON FEATURES Metabo S-automatic torque limiting clutch Spindle lock Fully closed guide plate for secure support Clearly visible cutting indicator for sawing after initial cut Safety lock switch to prevent unintentional start of the machine Angle adjustment of the sawing blade to the guide plate can be aligned for maximum cutting precision Angle-precise bevel cuts up to 45° Lubrication system for long service life of the gear Optimum sawing dust ejection External dust extraction outlet Precision guide rail available as accessory (order no. 6.31250) .… 40% more output with 40% less weight 1010 Watt 1400 Watt Circular Saw ci KS 54 Comparative Special advantages device characteristics = Sturdy aluminum die cast . Type of battery pack Li-lon saw housing Battery pack voltage 18vr = Cutting indicator can . Capacity of battery pack 2,2Ah be set precisely Cutting depth adjustable 0-53,5 mm = Extraction nozzle rotatable . Maximum cutting depth at 90° 53,5 mm and stoppable Maximum cutting depth at 45° 42 mm = Auto-stop carbon brushes . Saw blade diameter 165 mm No load speed 2.500 /min Comparative Weight (including battery pack) 43kg device characteristics Torque 4Nm 9 Nm Standard equipment Carbide circular saw blade Maximum cutting depth 54 mm 66 mm {18 teeth), 2 Li-Ion battery packs at 90° {18 V/2.2 Ah), hexagon spanner, Maximum cutting depth 38 mm 47 mm “AIR COOLED" quick charger at 45° AC 30 Plus Cutting depth adjustable 0-54 mm 0-66 mm Saw blade diameter 160 mm 190 mm No load speed 6.000 /min 4.200 /min Rated input power 1.010W 1.400 W Output power 630W 800 W Rated load speed 4.200 /min 3.200 /min Cutting speed at rated load 35 m/s 28 m/s Weight (without mains cable) 3,4 kg 5,5 kg Standard equipment Carbide thin Carbide thin circular saw blade circular saw blade {10 teeth), parallel (14 teeth), parallel guide/ripping guide/ripping fence, allen key fence, allen key 1 at nominal voltage, maximum voltage of 20 Volts Type KSAP 18 Type KS 54 KS 66 Order no. 6.02168 Order no. 6.00540 = 6.00542 =

COMMON FEATURES Metabo S-automatic torque limiting clutch Spindle lock Sturdy aluminum die cast saw housing Sturdy guide plate made from light-weight magnesium die cast Fully closed guide plate for secure support Stylish rubber insert on the top handle to aid a comfortable and secure grip Long double-guided parallel rip fence, can be used left or right Cleariy visible cutting indicator for sawing after initial cut Safety lock switch to prevent unintentional start of the machine Angle adjustment of the sawing blade to the guide plate can be Lubrication system for long service life of the gear Optimum sawing dust ejection External dust extraction outlet Extraction nozzle rotatable and stoppable Auto-stop carbon brushes Precision guide rail available as accessory (order no. 6.31213) Adjustment of machine without tools for using on the precision guide rail 6.31213 aligned for maximum cutting precision = Angle-precise bevel cuts up to 45° KS 66 Plus KSE 68 Plus 1600 Watt Electronic Circul. KSE 68 Plus Special advantages = Quick stop of saw blade on shutting . offthe machine = Vario Tacho Constamatic (VTC) full-wave . electronics = Thumbwheel for preselection of speed . = Electronic soft start . = Overload protection . = Two position riving knife lift point . Comparative device characteristics Torque 9 Nm 11 Nm Maximum cutting depth at 90° 66 mm 68 mm Maximum cutting depth at 45° 47 mm 48 mm Cutting depth adjustable 0-66 mm 0-68 mm Saw blade diameter 190 mm 190 mm No load speed 4.200 /min 2.000 - 4.200 /min Rated input power 1.400 W 1.600 W Output power 800 W 850 W Rated load speed 3.200 /min 4.200 /min Cutting speed at rated load 28 m/s 42 m/s Weight (without mains cable) 5,5 kg 5,6 kg Standard equipment Type Order no. Carbide thin circular saw blade (14 teeth), parallel guide/ripping fence, allen key Carbide thin circular saw blade (14 teeth), parallel guide/ripping fence, allen key KSE 68 Plus

Accessories Work benches Order no. Order no. m— = Precision guide rail 6.31213 _ . = Clean-cut edges with no L [new] [new] splintering thanks to the guide rail's plastic-extrusion strip edging — even with bevel cuts up to 45° = Guide rail made of sturdy, anodised Aluminium extrusion = Antisslip backing provides safe and reliable support and protects the workpiece surface against scratches = Guide rule, adjustable to eliminate play suitable for: Metabo jig saws, circular saws and router models OFE 738 and OfE 1229 Signal {when using the appropriate accessories; KS 66 Plus, KSE 68 Plus can be used) Overall length: 1.500 mm mm Connector 6.3121 ms “for ioining together Flexo 500 universal table 0910064304 two precision guide rails = For the stationary use of æ Metabo jig saws, routers and cireular saws (when using Da, Set of two clamps 6.31031 appropriate accessories) = For fixing the precision guide rail = With foldable stand and Ÿ on the workpiece or work table heïght adjustment N = Sturdy steel construction and a large FE fable op made from continuous trand ti Guide plate 6.31019 Sirand casting = For use with the KSAP 18, KS 54 and KS 54 SP circular saws accessories for Flexo 500 on the 6.31213 guide rail. = Complete guide plate with NEW 2 mounted aluminium Order no. threaded bushes for the : = Circular saw set 0910064398 cireular saws L 3 [new] For Metabo KS 54, F] Adapters 6.31020 | _— KSE 55 Plus, KS 66, ER * For use with ihe KS 66 and KSE 68 Plus circular saws L KSE 68 Plus circular saws =. Packaging dimensions (LxHxW): (alt. Order No. 6.00543) 750 x 280 x 130 mm NEW on the 6.31213 guide rail. Sawdust ejection nozzle 6.30924 — Table width extension 0910064401 Pun = Can be rotated = increases the supporting æ = For fitting the suction surface; ideal for hose on the circular saw large boards KS 54 and KSE 55 Plus = Enables cuts with Suction hose 6.31938 parallel guide of With connector 9 58 mm up to 610 mm for bayonet fitting and rubber = Heïght adjustable connector (internal 3 30 mm, Length: 674 mm outside 9 35 mm) Width: 501 mm Connector D: 58/35 mm Parallel guide/ripping fence 0910063707 Hose length: 3,5 m = For long cuts or for cutting æ Suction hose D: 27 mm large boards Metabox IV = Long attachment profile = Extremely robust, unbreakable for guiding the work boxes with a wide carrying handle piece safely = Carefully thought-out organisation system within the box... ensures Mitre guide 0910064410 that the correct accessory is always = Length of rule: 250 mm æ with the right tool - special inserts Anal : 4. 60° for storing accessories and small " Angle area: #7 parts... and transferring them from box to box - boxes can be stacked Chip and dust extraction unit 0910064371 and connected - well-structured, 7 = Extraction at two points: Fo] clearly arranged storage system, at chip box and at the for the workshop, the car, anywhere top on the guard = The Metabox stays in shape - = Clear view of the even at extreme temperatures work piece (-40° to +90°C) = Cleaner working = No protruding parts, and thus no environment danger of getting caught up, e.g. Extraction nozzle @: 100 mm on building sites Dimensions: 395 x 295 x 315 mm For KS 54, KSE 55 Plus, KS 66 6.24595 For KS 66 Plus, KSE 68 Plus 6.24598

1) exceptionally nail-proof saw blade Ëz

OTHERS SOMETIMES JUST DON'T CUT IT. Metabo offer a solid range of Jigsaws from entry level through to top end professional machines. with an extensive range of accessories these machines are capable of cutting a whole host of materials from Backed up wood, metals, plastics, brick and breeze block to fiber glass and rubber. Important features include high powered motors, tough gear housings, solid blade sup- ports and variable speed electronics to enable the right speed selection for the job in hand. Vario Constamatic (VC) electronics allow you to set the right speed for the application and then maintain that speed, even under moderate loading. Ergonomic design Safe and comfortable work due to a model that fits perfectly in the hand. Die cast aluminium gear housing Metal gear housings ensure optimum inte- gral machine strength and maximum heat dissipation which aids motor cooling and prolongs service life. Quick stop of guide plate It enables bevel cuts with angle settings of 15, 30 and 45°. 5-level pendulum blade movement High cutting output, more comfortable wor- king, longer service life of saw blades. Metabo , Quick" saw blade change Fast, convenient and safe. Saw blade change without key. Saw blade support roller with needle bearing and guide groove Precise saw cuts, as the support roller is particularly deep. Powerful for continuous professional use The 720-Watt electronic orbital jigsaws enable saw cuts of up to 135 mm thickness in wood. Absolutely straight or cireular cuts Additional accessories such as guide rails or circular guides expand the range of applications of the Metabo jigsaws. Vario Constamatic (VC) full-wave electronics The number of strokes can be adapted individually to the material to be cut. For metal, for example, it is low, for wood it is high.

COMMON FEATURES Robust gear and motor design Easier and quicker saw blade change Low lying saw blade supporting roller Quick locking of guide plate for bevel cuts Ideal handling by ergonomie design Full grip bow type handle Blower for free view of cutting line Upward slidable grip-guard Adjustable pendulum stroke External dust extraction outlet Auto-stop carbon brushes Chip break guard in the guide plate Precision guide rail and guiding device available as accessory Case for allen key

ST 50 Pendix STE 70 STE 80 Quick 400 Watt 570 Watt 610 Watt Orbital Jig Saw Electronic Electronic ST 50 Pendix Orbital Jig Saw Orbital Jig Saw STE 70 STE 80 Quick Special advantages = Metabo "Quick' saw . blade change = Vario Constamatic (VC) ° ° full-wave electronics = Thumbwheel for preselection . . of number of strokes Comparative device characteristics Torque 4 Nm 5 Nm 5,5 Nm Maximum thickness of material in - Wood 50 mm 70 mm 80 mm - Nonferrous metals 10 mm 20 mm 25 mm - Sheet steel 3 mm 6 mm 8mm Levels of pendulum stroke 4 4 4 Strokes at no load 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min Rated input power 400 W 570W 610W Output power 240W 340W 360 W Weight (without mains cable) 22kg 22 kg 23 kg Standard equipment Type Order no. Grip-guard, chip break guard plate, jig saw blade, allen key ST 50 Pendix 6.04000 = Protective glass, grip-guard, chip break guard plate, Ïig saw blade, allen key Protective glass, grip-guard, attachable guard plate with chip break guard plate, jig saw blade, allen key STE 70 STE 80 Quick 6.05700 = 6.06100 =

COMMON FEATURES = Robust gear and motor design = Adjustable pendulum stroke = Low lying saw blade supporting roller = Die cast aluminium gear housing = Quick locking of guide plate for bevel cuts = External dust extraction outlet = _ Ideal handling by ergonomic design = Auto-stop carbon brushes = Blower for free view of cutting line = Chip break guard in the guide plate = Upward slidable grip-guard = Precision guide rail and guiding device available “Vario Constamatic (VC) full-wave electronics as accessory = Thumbwheel for preselection of number of strokes = Case for allen key STE 100 Plus STE 135 STE 135 Plus STEB 135 STEB 135 Plus 680 Watt 720 Watt 720 Watt 720 Watt 720 Watt Electronic Electronic Electronic Electronic Electronic Orbital Jig Saw Orbital Jig Saw Orbital Jig Saw Orbital Jig Saw Orbital Jig Saw STE 100 Plus STE 135 STE 135 Plus STEB 135 STEB 135 Plus Special advantages = Powerful cutting in wood . . . . up to 135 mm thickness = Easier and quicker saw blade . . change = Metabo "Quick' saw blade . . . change = Rubber-coated full grip . . bowrtype handle = Slim motor housing and . . . additional knob Comparative device characteristics Torque 6Nm 7 Nm 7Nm 7 Nm 7 Nm Maximum thickness of material in - Wood 110 mm 135 mm 135 mm 135 mm 135 mm - Nonferrous metals 25 mm 35 mm 35 mm 35 mm 35 mm - Sheet steel 8 mm 10 mm 10 mm 10 mm 10 mm Levels of pendulum stroke 5 5 5 5 5 Strokes at no load 1.000 -2.800/min 1000-3.000/min 1000-3.000/min 1000-3.000/min 1.000 - 3.000 /min Rated input power 680 W 720W 720W 720W 720W Output power 400wW 450W 450 W 450W 450W Weight (without mains cable) 2.6 kg 2,5 kg 2,5 kg 2,6kg 2,6 kg Standard equipment Extraction nozzle, protective glass, grip-guard, chip break guard plate, jig saw blade, allen key Type STE 100 Plus Order no. 6.10501 Extraction nozzle, protective glass, grip-guard, chip break guard plate, jig saw blade, allen key STE 135

Extraction nozzle, protective glass, grip-guard, chip break guard plate, jig saw blade, Extraction nozzle, protective glass, grip-guard, chip break guard plate, jig saw blade, allen key allen key STE 135 Plus STEB 135 6.10900 = 6.11200 Extraction nozzle, protective glass, grip-guard, chip break guard plate, fig saw blade, allen key STEB 135 Plus

Jigsaw blade assortments with single lug bayonet shank Order no. surface against scratches Guide rule, adjustable to eliminate play Overall length: 1.500 mm For ST 50 Pendix, STE 70, STE 80 Quick, STE 100 Plus, STE 135 Plus, STEB 135 Plus Dimensions: 395 x 295 x 105 mm Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, nr con iogeth GP DeWalt, Elu, Festo, Hitachi, Holz-Her, Kress, Makita, Skil … &Wo precision guide rails Order no. [NEW Jigsaw blade assortment 1 6.23968 Set of two clamps 6.31031 = For wood and metal = For fixing the precision = HCS saw blades/ guide rail on the HSS saw blade workpiece Consisting of 1 saw blade each: or work table 6.23634, 6.23633, 6.23637 Jigsaw bench mounting plate 6.23689 Material suitability: With clamp for fixing on the Wood, Metal workbench Number of parts: 3 Table-top dimensions: Jigsaw blade assortment 2 6.23645 183 x 255 mm = Forwood, metal and plastic z Flexo 500 universal table 0910064304 = HCS saw blades/ = For the stationary use æ HSS saw blade of Metabo jig saws, Consisting of 1 saw blade each: routers and cireular 6.23633, 6.23635, 6.23632, 6.23631 saws [when using und 6.23637 appropriate accessories) Material suitability: = With foldable stand and Wood, Plastics, Metal height adjustment Number of parts: 5 = Sturdy steel construction Jigsaw blade assortment 3 6.23600 and a large table top = For wood, metal and plastic [NEW made from continuous = HCS saw blades/ strand casting HSS saw blades Consisting of 2 jigsaw blades each: "2 Table width extension 0910064401 6.23634, 6.23633, 6.23646, = increases the supporting surface; @s 6.23637, 6.23638 ideal for large boards Material suitability: = Enables cuts with parallel guide Wood, Metal, Plastics of up to 610 mm Number of parts: 10 [rew] = Height adjustable Jigsaw blade assortment 4 6.23698 Suitable for: UK 333, UK 290, = For wood Flexo 500 = HCS saw blades Length: 674 mm Consisting of 10 saw blades Width: 501 mm 6.23633 and 6.23635 and Lubricating stick 6.23443 5 saw blades 6.23649 = For lubricating the Material suitability: Wood jigsaw blades when Number of parts: 25 sawing metal 3 chip break guard plates 6.31208 Le | Suitable for: Accessories ST 50 Pendix, STE 70, STE 80 Quick 3 chip break guard plates 6.23665 Gsm Suitable for: STE 100 Plus, Guard plate 6.23664 STE 135, STE 135 Plus, = For fitting on the base STEB 135, STEB 135 Plus plate of jigsaws. The guard plate protects sensitive Suction hose 6.31938 workpiece surfaces With connector 9 58 mm from scratches for bayonet fitting and rubber Circle-cutting and 6.31340 connector (internal G 30 mm, L 2 parallel guide outside 9 35 mm) = For cutting circles of © 100 Hose length: 3,5 m 10 9 360 mm and Suction hose D: 27 mm for cutting parallel +0 an edge (maximum distance Carry case 6.25450 from the edge 210 mm) For ST 50 Pendix, STE 70, Guiding device 6.31249 STE 80 Quick = For using jigsaws in conjunction with the guide rail 6.31250/ 6.31213 - = Precision guide rail 6.31213 = Clean-cut edges with no Dew] splintering thanks to the Carry case 6.25446 guide rail's plastic-extrusion For STE 100 Plus, STE 105 Plus, strip edging - even with bevel STEB 105 Plus, STE 135, cuts up to 45° STE 135 Plus, STEB 135, = Guide rail made of sturdy, STEB 135 Plus anodised Aluminium extrusion = Antisslip backing provides safe and reliable support and pratects the workpiece = Metabox I for ST 50-STEB 135 6.24639

WITH THESES ONE ALWAYS MAKES À GOOD CUT. The features of the Metabo jig saw blades Colour Yellow Blue Black The colour indicates for which material the blade is suited best. for wood Yellow with blue lettering … for wood with nails for metal for special applications HCS carbon steel, 01d< Basic blade material for cutting soft wood, hardboards, plastics Hss High yielding high-speed steel, suitable for metal, aluminium work Bimetal especially flexible mix of HCS and HSS. The saw blades have a much higher life expectancy (bimetal) than HCS and HSS and have proven their worth when there is danger of shaft-breaking HM Hard-Metal (carbide) applicable to stainless steels, glass, re-inforced plastic, plastics, gypsum plaster or cement fibre boards. Saw blades with HM-coating are suitable for cutting ceramic tiles Quality class >classic< series >professional< series >pionier< series >expert< series O1ISS9, good results and very good service life fast, clean and precise angle-cutting with long service life cuts fast through all materials (‘through thick & thin") for special applications Type

Teeth milled, offset for clearance gap A relative rough cut, fast progress in cutting on hard and soft wood, aluminium, NE-metals and plastics

Teeth milled, Teeth ground, Teeth ground, offset waved for clearance offset for clearance for clearance angle gap gap and clearance gap A relative rough cut, Fast cutting in hard Fine and clean cut in fast progress in cutting and softwood wood and plastics hard and soft wood, aluminium, NE-metals and plastics Shank forms OqDJSU pooM/ZzJOH >jeu Single lug bayonet shank The jig-saw blades from Metabo are produced to all shank forms matching the jig saws available from other brand names. U-Shank Makita-Shank Fine shank

Jig saw blades with single lug bayonet shank Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, DeWat, Elu, Festo, Hitachi, Holz-Her, Kress, Makita, Ski … Material suitability Version Material Usable Tooth Corresponds Packing Order length pitch to unit no. mm Bosch type

FOR WOOD, "CLASSIC" SERIES

DL _ Er 2) Hard wood, Soft wood, Chipboards, Milled, Crimped Hcs 51 2,0 mm Tu98 5 6.23631 Wood-core plywood 2-15 mm, Fibre boards 2-15 mm, Plastics, Insulating material

Hard wood, Soft wood, Chipboards, Milled, Crimped Hcs 66 19-2,3mm/ T19B 5 6.23920 Wood-core plywood 2-15 mm, 23-17 TPW/ Fibre boards 2-15 mm, Plastics, progressiv Insulating material, Saw blade with insertion head

men v8 Hard wood, Soft wood, Chipboards, Milled, Crimped Hcs 51 2,0 mm T 119 80 5 623646 2% Wood-core plywood 2-20 mm, 25 623605 = Fibre boards 2-20 mm, Plastics, 26 Insulating material, Especially 0 for curved cuts ° Hard wood, Soft wood, Milled, Crossed Hcs 74 3,0 mm TMC 3 Plastics, 4-50 mm, 5 For quick, 25 rough cuts 100 A

FOR WOOD, "PROFESSIONAL" SERIES Ê

EC mn Hard wood, Soft wood, Ground, Crossed HCS 74 4,0 mm T144D 3 6.23964 Chipboards, 5 6.23633 Wood-core plywood 5-50 mm, 25 623690 For quick cuts 7100 623712 © REC naar 8 Hard wood, Soft wood, Ground, Crossed Hcs 74 452mm T144D 5 623921 80 Chipboards, Wood-core 6-5 TPI/ ££ plywood 5-50 mm, progressiv 4û For quick cuts, Saw blade sr with insertion head È Hard wood, Soft wood, Ground, Crossed HCS 74 4,0 mm T244D 3 Chipboards, 5 Wood-core plywood 5-50 mm, 25 Especially for curved cuts 100 (CC me Hard wood, Soft wood, Ground, Crossed Hcs 74 452mm T244D 5 6.23960 Chipboards, Wood-core 6-5 TPI/ plywood 5-50 mm, progressiv Especially for curved cuts, Saw blade with insertion head ER anna) Hard wood, Soft wood, Ground, Crossed HCS 126 4,0 mm T344D 5 6.23678 Chipboards, Wood-core plywood 2-15 mm, Fibre boards, For quick cuts Hard wood, Soft wood, Ground, Crossed HCS 150 4,0 mm T744 D 5 6.23603 Chipboards, Wood-core plywood, Fibre boards, Constructional wood, Extra thick WATER-/PUMP TECHNOLOGY WELDING TECHNOLOGY COMPRESSED AIR SYSTEMS

Soft wood, Plywood, Clearance angle HCS 57 1,4 mm T101A0 5 6.23651 Plastics, 1.5-5 mm, ground, Tapered 25 6.23624 Especially for curved cuts, For clean cuts

Material suitability Version Material Usable … Tooth Corresponds Packing Order length pitch to unit no. mm Bosch type Hard wood, Soft wood, Clearance angle Hcs 74 2,5 mm T1018 3 6.23961 Chipboards, Wood-core plywood, ground, 5 23634 Fibre boards, Plastics, 3-30 mm, Teeth ground 25 6.23691 For clean cuts 7100 6.23703 Hard wood, Soft wood, Chipboards, Clearance angle Hcs 74 2,7 mm/9TPI T101B 5 6.23969 Wood-core plywood, Fibre boards, ground, Plastics, 3-30 mm, For clean cuts, Teeth ground Saw blade with insertion head Hard wood, Soft wood, Chipboards, Clearance angle ground, HCS 74 2,5 mm T101 BR 5 6.23650 Wood-core plywood, Fibre boards, Teeth ground, 25 6.23608 Coated boards, 3-30 mm, Reverse toothed 7100 623705 For clean cuts Hard wood, Soft wood, Chipboards, Clearance angle Hcs 74 4,0 mm Ti01D 3 6.23962 Wood-core plywood 10-45 mm, ground, 5 6.23635 Fibre boards 10-45 mm, Teeth ground 725 623609 For clean cuts 100 6.237044 Hard wood, Soft wood, Chipboards, Clearance angle Hcs 74 452mm T101D 5 6.23923 Wood-core plywood 10-45 mm, ground, 6-5 TPI/ Fibre boards 10-45 mm, Teeth ground progressiv For clean cuts, Saw blade with insertion head Hard wood, Soft wood, Chipboards, Clearance angle Hcs a 3,0 mm T 301 CD 5 6.23654 Wood-core plywood 4-60 mm, ground, Fibre boards 4-60 mm, Teeth ground For clean cuts

Hard wood, Soft wood, Doors, Ground, Crossed Hcs 74 4,0 mm T 144 DP 5 6.23694 Kitchen worktops 5-50 mm, For angle-precise cuts, Extra thick

Hard wood, Soft wood, Chipboards, Ground, Hcs 104 4,0 mm T 344 DP 5 6.23679 Wood-core plywood 5-100 mm, Teeth ground Fibre boards 5-100 mm, For angle-precise cuts, Extra thick mé ne mm Kitchen worktops, Clearance angle Hcs a 2,5 mm T 301 BCP 5 6.23685 Hard wood 3-65 mm, ground, Soft wood 3-65 mm, Doors, Teeth ground For angle-precise cuts, Extra thick

FOR WOOD, "PROFESSIONAL" SERIES, BIM

ER maman Hard wood, Soft wood, Ground, Crossed BiM 74 4,0 mm T 144 DF 5 6.23976 Coated boards, 5-50 mm, For quick cuts BR mnt Hard wood, Soft wood, Ground, Crossed BiM 74 45,2mm/ T144DF 5 6.23933 Wood with nails, 6-5 TPI/ Coated boards, 5-50 mm, progressiv For quick cuts, Saw blade with insertion head RG Porn Hard wood, Soft wood, Ground, Crossed BiM 126 4,0 mm T 344 DF 5 6.23980 Coated boards, 5-100 mm, For quick cuts

Material suitability Version Material Usable Tooth Corresponds Packing Order length pitch to unit no. mm Bosch type

Especially for laminate, Clearance angle BiM 57 1,4 mm T101 AOF 5 6.23695 Laminated flooring, Hard wood, ground, Soft wood, Coated boards, Teeth ground, Plywood, Especially for curved cuts, Tapered For clean cuts

Especially for laminate, Clearance angle BiM 74 17 mm TAO1 AIF 5 623948 52 Laminated flooring, Hard wood, ground, Lt: Soft wood, Coated boards, Teeth ground, EE Plastics, 2-30 mm, For clean cuts Tapered CE Hard wood, Soft wood, Clearance angle BiM 74 27 mm T 101 BF 5 6.23975 Laminated flooring, ground, Coated boards, Teeth ground : Plastics, 3-30 mm, 8 For clean cuts, £E Saw blade with insertion head 58 a fe

Especially for laminate, Clearance angle BiM 74 2,5 mm TIOIBRF 5 6.23686 ô Laminated flooring, ground, Kitchen worktops 3-30 mm, Teeth ground, Coated boards, Reverse toothed For clean cuts EEE Hard wood, Clearance angle BiM a 3,0 mm T301CDF 5 6.23696 a Soft wood, ground, £ Coated boards, 4-60 mm Teeth ground E Hard wood, Soft wood, Clearance angle BiM 105 3,0 mm T 301 CLF 5 6.23977 Chipboards, ground, Glued woods 5-80 mm, Teeth ground Fibre glass reinforced plastics, 5-30 mm, For quick cuts Hard wood, Soft wood, Ground BiM 90 2,5 mm TUTHE 5 6.23949 Wood with nails, Non-ferrous metals, Plastics

Wood, Wood with nails, Crossed, Milled BiM 106 2,4-5,0 mm, T345XF 5 6.23677 Metal, Non-ferrous metals, progressiv 25 6.23621 Plastics .

nur ver ROME EI s9 Sheet steel, 1-3 mm, Milled, Crimped Hss 51 12mm T218A 5 623647 °° Non-ferrous metals, Especially for curved cuts

Material suitability Version Material Usable … Tooth Corresponds Packing Order length pitch to unit no. mm Bosch type Sheet steel, 1.3 mm, Milled, Crimped Hss 66 1,11,5mm/ TABA 5 6.23924 Non-ferrous metals, 23-17 TP Saw blade with insertion head progressiv Sheet steel, 1.3 mm, Milled, Crimped Hss 66 111,5mm/ T218A 5 6.23926 Non-ferrous metals, 23-17 TP Especially for curved cuts, progressiv Saw blade with insertion head Sheet steel, 1-3 mm, Milled, Crimped HsS 106 1,2 mm T318A 5 6.23629 Non-ferrous metals, 25 6.23623 sandwich materials 100 6.23716 Sheet steel, 2.5-6 mm, Milled, Crimped HsS 51 2,0 mm T18B 5 6.23638 Non-ferrous metals 25 6.23618

Material suitability Version Material Usable Tooth Coresponds Packing Order length pitch to unit no. mm Bosch type

Aluminium 3-15 mm, Milled, Crossed BiM 75 3,0 mm T127DF 5 62394 = Non-ferrous metals 4 -20 mm, 5z Plastics, For quick cuts 26

Fibre glass reinforced plastics, Ground carbide 91 3,3mm T 301 CHM 3 6.23687 Corian 4-60 mm FOR GYPSUM CARTON/CEMENT MATERIALS, "EXPERT" SERIES Gypsum plaster, Ground carbide 74 43 mm T 141 HM 1 6.23652 Cement fibre boards 5-50 mm, Fibre glass reinforced plastics, 5-20 mm, WOOD-PROCESSING TECHNOLOGY Gypsum plaster, Ground carbide 106 43mm T 341 HM 1 6.23688 Cement fibre boards 5-80 mm, 3 6.23671 Fibre glass reinforced &> plastics, 5-50 mm, 58

Plexiglas, Polycarbonate 2-20 mm, Clearance angle ground, HSS 74 2,0 mm T101A 5 6.236400 =} Non-ferrous metals 2 -10 mm Teeth ground

FOR SOFT MATERIALS, "EXPERT" SERIES

Pure DR Expanded polystyrene, Cardboard, Knife-blade ground, HCS 74 TN3A 5 6.23641 3 Leather, Rubber, Carpet up to 50 mm Straight ga — _ 892 am F

Expanded polystyrene, Cardboard, Knife-blade ground, HCS 126 T313AW 3 6.23684 F Leather, Rubber, Carpet up to 50 mm Crimped

FOR CERAMIC MATERIALS, "EXPERT" SERIES

Ceramic, Glass, Coarse Carbide, 76 - T 130 Riff 1 623657 Qu Fibre glass reinforced plastics, coated DÈ Cast iron FE

ER 20 Ceramic, Glass, Fine Carbide, 76 - T 150 Riff 1 623658 ©* Fibre glass reinforced plastics, coated Cast iron

Jig saw blades with Fein shank Suitable for FEIN jig saws Material suitability Version Material Usable Tooth Corresponds Packing Order length pitch to unit no. mm Bosch type

FOR WOOD, "PROFESSIONAL" SERIES

D ES Hard wood, Soft wood, Clearance angle ground, HCS 60 30mm F1C 5 6.23992 Chipboards, Wood-core plywood, Teeth ground Fibre boards 10-40 mm Hard wood, Soft wood, Clearance angle ground, HCS 60 40mm F1D 5 6.23993 Wood-core plywood, Teeth ground Fibre boards 10-40 mm

Sheet steel, 1-3 mm Milled, Crimped BiM 60 12mm F18AF 5 6.23994 Sheet steel, 2.5-6 mm, Milled, Crimped BiM 60 20mm F18BF 5 6.23995 Plastics FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES Aluminium, Milled, Crossed BiM 75 3,0mm F127DF 5 6.23997 Non-ferrous metals 3-15 mm, Pipes up to 30 mm, Profiles up to 30 mm Jig saw blades with universal shank Suitable for Black & Decker, Skil, Kress and others Material suitability Version Material Usable Toothpitch Corre- Packing Order length sponds unit no. mm to Bosch type

FOR WOOD, "CLASSIC" SERIES

EEE Hard wood, Soft wood, Milled, Crossed HCS 74 3,0 mm UmC 5 6.23945 Chipboards, Wood-core plywood, Fibre boards 5-50 mm, For clean cuts

FOR WOOD, "PROFESSIONAL" SERIES

EE ananas Hard wood, Soft wood, Ground, Crossed HCS 82 4,0 mm U144D 5 6.23944 Chipboards, Wood-core plywood, Fibre boards 5-50 mm 2 me 3 PMR HER EE D Hard wood, Soft wood, Clearance angle ground, HCS 52 13mm U1A0 5 6.23936 Plywood, Tapered Coated boards, 1.5-15 mm, Especially for curved cuts ET EN Hard wood, Soft wood, Clearance angle ground, HCS 82 2,5 mm U101B 5 6.23943 Chipboards, Wood-core plywood, Teeth ground Fibre boards 10-45 mm, For clean cuts Hard wood, Soft wood, Chipboards, Clearance angle ground, HCS 82 4,0 mm U 101 D 5 6.23942 Wood-core plywood, Fibre Teeth ground boards 10-45 mm, For clean cuts

Material suitability Version Material Usable Toothpitch Core- Packing Order length sponds unit no. mm to Bosch type

FOR WOOD, "PROFESSIONAL" SERIES, BIM

Hard wood, Soft wood, Ground, Crossed BiM 74 4,0 mm UW44DF 5 6.23904 Chipboards, Wood-core plywood, Fibre boards 5-50 mm, For quick cuts Hard wood, Soft wood, Clearance angle ground, BiM 82 2,5 mm U 101 BF 5 6.23905 Chipboards, Wood-core plywood, Teeth ground Fibre boards 3-30 mm, Coated boards, For clean cuts

Hard wood, Soft wood, Chipboards, Clearance angle ground, HCS 90 20-30mm, U234X 5 6.23903 z Wood-core plywood, Teeth ground progressiv ee Fibre boards 2-65 mm, 22 For quick cuts FE

FOR WOOD AND METAL, "PIONEER" SERIES 26

Wood, Wood with nails, Milled, Crossed BiM 107 24-50mm, U345XF 5 6.23906 Metal, Non-ferrous metals, progressiv Plastics

Sheet steel, 15-10 mm, Milled, Crossed Hss 74 12-26mm, U123X 5 623909 = Pipes, Profiles up to 30 mm progressiv FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES Aluminium, Non-ferrous Milled, Crossed Hss 74 3,0 mm U127D 5 6.23939 3 metals 3-15 mm, Pipes, gé Profiles up to 30 mm 50

Jig saw blades with Makita shank Suitable for Makita jigsaws Material suitability Version Material Usable Tooth Corres- Packing Order length pitch pondsto unit no. mm Bosch type

FOR WOOD, "CLASSIC" SERIES

ere SN Soft wood, Plywood, Chipboards, Milled, Crossed HCS 62 2,5 mm MA 119 HO 5 6.23958 Wood-core plywood, Fibre boards 3-15 mm, Especially for curved cuts CRE Hard wood, Soft wood, Milled, Crossed Hcs 62 3,0 mm MAMC 5 6.23955 Chipboards, Wood-core plywood, Fibre boards 4-50 mm, For rough cuts

FOR WOOD, "PROFESSIONAL" SERIES

Ce ne Hard wood, Soft wood, Ground, Milled Hcs 82 3,0 mm MA 144 CD 5 6.23919 Chipboards, Wood-core plywood, Fibre boards 4-50 mm, For quick cuts Hard wood, Soft wood, Clearance angle Hcs 62 27 mm MA 101 BC 5 6.23959 Chipboards, ground, Wood-core plywood, Teeth ground Fibre boards, Plastics, 3-30 mm, For clean cuts

FOR WOOD, "PIONEER" SERIES

Co er, Hard wood, Soft wood, Clearance angle Hcs 92 progressiv, MA234X 5 6.2391 Chipboards, ground, 2,0-3,0 mm Wood-core plywood, Teeth ground Fibre boards 2-65 mm, For quick cuts, For clean cuts

FOR WOOD AND METAL, "PIONEER" SERIES

Wood, up to 65 mm, Milled, Crossed BiM 102 progressiv, MA 345 XF 5 6.23912 Wood with naîls, Metal sheets, 2,5-5,0 mm Pipes, Aluminium, Plastics, 3-10 mm