Omada Pro S4500-8GP2F - Network switch TP-LINK - Free user manual and instructions
Find the device manual for free Omada Pro S4500-8GP2F TP-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed L2+ Gigabit Ethernet Switch |
| Model | Omada Pro S4500-8GP2F |
| Ports | 8 x 10/100/1000 Mbps RJ45 (PoE+) + 2 x Gigabit SFP Slots |
| PoE Budget | 120 W |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| Dimensions (W x D x H) | 294 x 180 x 44 mm |
| Weight | 3.1 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Maximum Power Consumption | 110 W |
| Operating Temperature | 0°C to 50°C |
| Management Features | VLAN, QoS, IGMP Snooping, STP, ACL, SNMP, Web GUI, CLI |
| Layer 2 Features | 802.1Q VLAN, Link Aggregation, Spanning Tree, Port Mirroring |
| Security | MAC Address Filtering, Port Security, ACL, Storm Control |
| Maintenance & Cleaning | Disconnect power, clean with dry cloth; do not use liquid cleaners |
| Safety Warnings | Keep away from moisture, ensure proper ventilation, do not block vents |
| Spare Parts & Repairability | No user-serviceable parts; contact TP-Link support for repairs |
| General Information | Part of Omada Pro series; rack-mountable; fanless design for silent operation |
Frequently Asked Questions - Omada Pro S4500-8GP2F TP-LINK
What is the default IP address of the TP-Link Omada Pro S4500-8GP2F?
The default IP address is 192.168.0.1. You can access the web interface by connecting a PC to one of the ports and setting a static IP in the same subnet.
Does the S4500-8GP2F support PoE+?
Yes, all eight RJ45 ports support PoE+ (IEEE 802.3at) with a total power budget of 120W, allowing you to power devices like IP cameras and access points.
How to reset the switch to factory defaults?
Press and hold the Reset button (located on the front panel) for about 10 seconds until the LED indicators flash. Release the button, and the switch will reboot to factory settings.
Can I use the SFP ports for fiber uplink?
Yes, the two SFP slots support Gigabit SFP modules (fiber or copper) for uplink to another switch or network backbone. Ensure the module is compatible with your network.
What VLAN configuration is supported?
The switch supports 802.1Q VLAN with up to 256 VLAN groups. You can configure port-based VLANs, tagged/untagged VLANs, and VLAN trunking.
Does the switch support SNMP?
Yes, it supports SNMP v1/v2c for network management and monitoring. You can enable SNMP in the management interface under SNMP Configuration.
What is the maximum power consumption of the switch?
Without PoE load, the switch consumes around 15W. With maximum PoE output, it can go up to 110W (including PoE budget). Power supply is 100-240 V AC.
How to update the firmware?
Download the latest firmware from the TP-Link Support website. Access the web interface, go to System Tools > Firmware Upgrade, upload the file, and wait for the switch to reboot.
Can I mount the switch on a wall?
The switch is designed for rack-mounting (ears included) but can also be placed on a desktop. Wall mounting is not recommended due to ventilation requirements.
What kind of warranty does TP-Link offer for this switch?
TP-Link provides a limited lifetime warranty for the Omada Pro series. Check the official website for detailed terms and conditions.
User questions about Omada Pro S4500-8GP2F TP-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual Omada Pro S4500-8GP2F - TP-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Omada Pro S4500-8GP2F by TP-LINK.
USER MANUAL Omada Pro S4500-8GP2F TP-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TP-LINK
Model : Omada Pro S4500-8GP2F
Category : Network switch