FLD40V0W - Tumble dryer Avanti - Free user manual and instructions
Find the device manual for free FLD40V0W Avanti in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ventless Electric Tumble Dryer |
| Capacity | 4.0 cu ft (approx. 113 liters) |
| Dimensions (H x W x D) | 33 x 24 x 24 inches (83.8 x 61 x 61 cm) |
| Weight | 98 lbs (44.5 kg) |
| Power Supply | 120 V / 60 Hz / 15 A |
| Energy Consumption | Approx. 2.2 kWh per cycle |
| Drying Programs | Auto Dry, Timed Dry, Delicate, Wrinkle Prevent |
| Moisture Sensor | Yes, automatic shut-off when dry |
| Drum Material | Stainless steel |
| Lint Filter | Removable, clean after each use |
| Condenser Cleaning | Periodic cleaning required (every 3-6 months) |
| Door Reversibility | Yes, reversible hinge |
| Control Type | Electronic with LED display |
| Safety Features | Child lock, overheat protection, door safety switch |
| Noise Level | 65 dB (normal operation) |
| Installation Type | Freestanding or stackable (with kit) |
| Venting | Ventless (condenser type) |
| Dryer Rack | Included for delicate items |
| Warranty | 1 year limited parts and labor |
| Repairability | Common parts available online; user-serviceable lint filter and condenser |
Frequently Asked Questions - FLD40V0W Avanti
How do I clean the lint filter on my Avanti FLD40V0W?
Remove the lint filter from the door opening, pull apart the two mesh screens, and wipe off lint with a soft cloth. Rinse with water if necessary and let dry completely before reinserting. Clean after every cycle to maintain efficiency.
Does the Avanti FLD40V0W require venting?
No, this is a ventless condenser dryer. It collects moisture in a removable tank or drains it via a hose. No external venting is needed, making it ideal for apartments.
What is the capacity of the FLD40V0W?
The dryer has a capacity of 4.0 cubic feet, suitable for small to medium loads, such as a week’s worth of laundry for a single person or a couple.
How do I reset the child lock on my Avanti dryer?
Press and hold the Child Lock button for 3 seconds until the indicator light turns off. To activate, hold again until the light turns on. Refer to the manual for exact button location.
Why is my Avanti FLD40V0W not drying properly?
Check the lint filter for blockage, ensure the condenser is clean, and verify the selected cycle matches the fabric type. Overloading can also reduce drying performance.
Can I stack the Avanti FLD40V0W on top of a washing machine?
Yes, with the optional stacking kit (purchased separately). Ensure both appliances are of matching width and the kit is installed securely.
What does the ‘Wrinkle Prevent’ feature do?
This feature periodically tumbles the clothes after the drying cycle ends without heat, preventing wrinkles if you cannot unload immediately. It runs for up to 90 minutes.
How do I drain the water from the condenser?
The dryer has a water tank that collects condensation. Pull out the drawer at the bottom, empty it into a sink, and replace it. Alternatively, attach a hose for continuous drainage.
What is the energy consumption of the FLD40V0W?
Approximately 2.2 kWh per cycle, depending on load size and selected program. This is typical for a compact ventless dryer.
Are replacement parts available for the Avanti FLD40V0W?
Yes, common parts like lint filters, belts, and door hinges are available online through authorized dealers and third-party retailers. Always use genuine parts for safety.
User questions about FLD40V0W Avanti
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual FLD40V0W - Avanti and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FLD40V0W by Avanti.