TX55U-IT - Anemometer LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free TX55U-IT LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Anemometer (Wind Speed Sensor) |
| Brand | La Crosse Technology |
| Model | TX55U-IT |
| Measurement | Wind speed (m/s, km/h, mph, knots, Beaufort) |
| Wind Speed Range | 0 to 111.8 mph (0 to 50 m/s) |
| Transmission Frequency | 433 MHz |
| Transmission Range | Up to 330 feet (100 meters) open air |
| Power Supply | 2 x AA batteries (not included) |
| Battery Life | Approximately 12 months |
| Sensor Dimensions | 5.1 x 3.9 x 4.7 inches (13 x 10 x 12 cm) |
| Weight | 4.2 oz (120 g) without batteries |
| Housing Material | UV-resistant plastic |
| Mounting | Pole or mast mount (included bracket) |
| Operating Temperature | -40°F to 140°F (-40°C to 60°C) |
| Water Resistance | IPX4 (splash resistant) |
| Compatibility | La Crosse Technology weather stations |
| Update Interval | Every 15 seconds |
| Wind Accuracy | ±1.8 mph (0.8 m/s) or ±5% |
| Certification | FCC, CE, RoHS |
| Maintenance | Clean with soft cloth, avoid solvents |
Frequently Asked Questions - TX55U-IT LA CROSSE TECHNOLOGY
How do I reset the TX55U-IT anemometer?
Remove the batteries, wait 10 seconds, then reinsert them. This will reset the sensor.
What is the best placement for the anemometer?
Mount it on a pole or mast at least 5 feet above ground, away from obstructions like trees and buildings for accurate wind readings.
What type of batteries does the TX55U-IT use?
It requires 2 AA alkaline or lithium batteries. Lithium batteries are recommended for cold climates.
How do I sync the anemometer with my weather station?
Press the sync button on the weather station receiver, then press the TX button on the sensor within 2 minutes. Refer to your station's manual for exact steps.
What is the maximum transmission range?
The wireless range is up to 330 feet (100 meters) in open air. Walls and metal objects can reduce range.
Is the TX55U-IT waterproof?
It has an IPX4 rating, meaning it is splash resistant but not waterproof. Avoid full submersion.
How do I change the wind speed units?
Units are set on the receiving weather station, not on the sensor. Change the unit setting on the station display.
What should I do if the wind reading is erratic?
Check for loose mounting, debris in the cups, or interference from other wireless devices. Reset the sensor if needed.
Can I use the TX55U-IT with other brands?
It is designed specifically for La Crosse Technology weather stations. It may not be compatible with other brands due to different protocols.
How often does the sensor transmit data?
The sensor updates wind speed every 15 seconds to the receiver.
User questions about TX55U-IT LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Anemometer in PDF format for free! Find your manual TX55U-IT - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TX55U-IT by LA CROSSE TECHNOLOGY.
USER MANUAL TX55U-IT LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : TX55U-IT
Category : Anemometer