TX145WSDTH - Anemometer LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free TX145WSDTH LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Anemometer / Wind Speed Meter |
| Model | TX145WSDTH |
| Brand | La Crosse Technology |
| Measurement Parameters | Wind Speed, Wind Chill, Temperature (optional) |
| Wind Speed Range | 0.3 to 30 m/s (approximate) |
| Wind Speed Units | m/s, km/h, mph, knots, Beaufort scale |
| Accuracy | ±5% of reading |
| Resolution | 0.1 m/s |
| Display | LCD with backlight |
| Power Supply | 2 AAA batteries (1.5V) |
| Battery Life | Approximately 12 months with moderate use |
| Auto Power Off | After 5 minutes of inactivity |
| Dimensions | 150 x 45 x 25 mm |
| Weight | 95 g (including batteries) |
| Material | ABS plastic |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Functions | Current, average, and max wind speed; wind chill; temperature (°C/°F); data hold |
| Accessories Included | Lanyard, user manual |
| Maintenance | Clean with a soft, dry cloth; avoid liquids; store in dry place |
| Safety Precautions | Do not drop or expose to extreme temperatures; remove batteries if not used for long periods |
| Spare Parts / Repairability | Not user-serviceable; contact manufacturer for support |
| Certifications | CE, FCC |
Frequently Asked Questions - TX145WSDTH LA CROSSE TECHNOLOGY
How do I switch between wind speed units?
Press the UNIT button repeatedly to cycle through m/s, km/h, mph, knots, and Beaufort scale. The selected unit is displayed on the screen.
How to measure wind speed with this anemometer?
Hold the anemometer so the wind flows directly into the impeller (rotating cups). Press the SCAN button to start a measurement. The current wind speed will appear on the LCD.
What type of batteries does the TX145WSDTH require?
It requires two AAA alkaline batteries (1.5V each). Do not use rechargeable batteries unless specified.
How do I replace the batteries?
Open the battery compartment on the back by sliding the cover off. Insert two AAA batteries with correct polarity (+/-), then close the cover securely.
Why is the display blank or not functioning?
First, check if the batteries are installed correctly and have sufficient charge. If the display is still blank, try pressing the RESET button (if available) or remove and reinsert the batteries.
How to reset the device?
Locate the small RESET pinhole on the side or back of the unit. Use a paperclip to gently press the button inside. All settings will return to factory defaults.
Does the anemometer measure temperature?
Yes, the TX145WSDTH includes a temperature sensor. It displays the current ambient temperature in °C or °F. Press the TEMP button to toggle between units.
Is the anemometer waterproof?
No, it is not waterproof. It is designed for outdoor use but should be protected from rain and direct water splashes. Avoid submerging it in water.
How accurate is the wind speed measurement?
The accuracy is typically ±5% of the reading within the range of 0.3 to 30 m/s. For best results, ensure the impeller is clean and spins freely.
How should I clean and maintain the anemometer?
Use a soft, dry cloth to wipe the exterior. For the impeller, use a soft brush to remove dust. Do not use chemical cleaners or immerse the unit in liquid.
User questions about TX145WSDTH LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Anemometer in PDF format for free! Find your manual TX145WSDTH - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TX145WSDTH by LA CROSSE TECHNOLOGY.
USER MANUAL TX145WSDTH LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : TX145WSDTH
Category : Anemometer