LTV-W1 - Anemometer LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free LTV-W1 LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Anemometer |
| Brand | La Crosse Technology |
| Model | LTV-W1 |
| Power Source | 2 x AAA batteries (not included) |
| Display Type | LCD |
| Wind Speed Range | 0.5 to 50 m/s (1.1 to 111 mph) |
| Wind Speed Accuracy | ±5% of reading |
| Wind Speed Resolution | 0.1 m/s (0.2 mph) |
| Temperature Range | -20°C to 60°C (-4°F to 140°F) |
| Temperature Accuracy | ±1°C (±2°F) |
| Temperature Resolution | 0.1°C (0.2°F) |
| Features | Wind speed, temperature, wind chill, data hold, max/min record, auto power off |
| Dimensions | 150 x 50 x 30 mm (5.9 x 2.0 x 1.2 in) |
| Weight | 100 g (3.5 oz) without batteries |
| Care and Cleaning | Wipe with a soft, dry cloth. Do not use harsh chemicals or immerse in water. |
| Safety Warnings | Keep away from children. Do not disassemble. Remove batteries when not in use for long periods. |
| Spare Parts / Repairability | No user-serviceable parts. Contact La Crosse Technology support for repairs. |
| General Information | Handheld anemometer for measuring wind speed and temperature. Ideal for outdoor activities. |
Frequently Asked Questions - LTV-W1 LA CROSSE TECHNOLOGY
How do I install batteries in the LTV-W1 anemometer?
Open the battery compartment on the back by sliding the cover. Insert two AAA batteries with correct polarity (+/-) as indicated. Close the cover securely.
How do I measure wind speed?
Point the impeller into the wind. The LCD will display current wind speed. Press the 'HOLD' button to freeze the reading.
What is the wind speed range of this device?
The LTV-W1 measures wind speed from 0.5 to 50 m/s (1.1 to 111 mph).
How do I switch between units?
Press and hold the 'UNIT' button for 3 seconds to toggle between m/s, km/h, mph, knots, and ft/min.
How do I view the maximum wind speed?
Press the 'MAX/MIN' button once to display the maximum recorded wind speed. Press again to see minimum. Press and hold to clear the memory.
Does this anemometer measure temperature?
Yes, it measures ambient temperature from -20°C to 60°C (-4°F to 140°F). The temperature sensor is located near the LCD.
Why is the display blank or shows 'LLL'?
Replace the batteries if the display is dim. 'LLL' may indicate the temperature is out of range. Place the device in a warmer or cooler environment.
How do I clean the anemometer?
Use a soft, dry cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Keep the impeller free of debris.
Can I use this device indoors?
Yes, it can be used indoors to measure airflow or draft, but it is designed for outdoor use.
How do I contact support?
Visit the La Crosse Technology website or call customer service. Have your model number (LTV-W1) ready.
User questions about LTV-W1 LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Anemometer in PDF format for free! Find your manual LTV-W1 - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LTV-W1 by LA CROSSE TECHNOLOGY.
USER MANUAL LTV-W1 LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : LTV-W1
Category : Anemometer