3LVF-623.1 - Dishwasher FAGOR - Free user manual and instructions
Find the device manual for free 3LVF-623.1 FAGOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Fagor |
| Model | 3LVF-623.1 |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | Approx. 50 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Water Connection | Cold water only |
| Place Settings | 12 standard place settings |
| Energy Efficiency Class | A+ |
| Noise Level | 49 dB(A) |
| Number of Programs | 6 (Eco, Auto, Intensive, Quick, Glass, Soak) |
| Delay Start | 1-24 hours |
| Additional Functions | Half load, Extra dry, Hygiene |
| Safety Features | Child lock, Anti-flood system, AquaStop |
| Interior Material | Stainless steel |
| Filter System | Self-cleaning coarse and fine filters |
| Maintenance | Clean filters monthly, run maintenance program with descaler |
| Spare Parts Availability | Racks, spray arms, filters, seals available for at least 10 years |
| Repair Index | 8.5/10 (high repairability) |
Frequently Asked Questions - 3LVF-623.1 FAGOR
What detergent should I use for my Fagor 3LVF-623.1 dishwasher?
Use only dishwasher-specific detergent (powder, gel, or tablets) in the dispenser. Avoid hand dish soap as it causes excessive suds.
How do I add rinse aid to the dishwasher?
Open the rinse aid compartment (usually on the door), fill to the indicated level with liquid rinse aid. Adjust the setting if spotting occurs.
Why is my dishwasher not cleaning properly?
Check that the spray arms are not clogged, filters are clean, and you are using the correct detergent. Also ensure items are not blocking the arms.
How often should I clean the filters?
Clean the coarse and fine filters under running water every 1-2 months or if you notice residue. They are located at the bottom of the tub.
What does an E1 error code mean?
E1 indicates a water filling problem. Check that the water tap is open and the inlet hose is not kinked. If persists, call service.
Can I open the dishwasher during a cycle?
It is not recommended as it may interrupt the cycle and cause water leakage. If necessary, pause and wait a few seconds before opening slowly.
How do I use the delay start function?
Press the Delay Start button repeatedly to set the number of hours (1-24) until the cycle starts. The dishwasher will begin automatically after the delay.
Why is there water left in the bottom after a cycle?
This could be a clogged drain hose or filter. Check the drain hose for kinks and clean the filters. If problem persists, check the drain pump.
What is the best program for heavily soiled pots?
Use the Intensive program at a high temperature (65-70°C) with extra drying if available. Pre-rinse heavy residue if necessary.
How do I reset the dishwasher after a power failure?
Simply turn the selector knob to the Off position, wait a few seconds, then select your desired program again. The cycle will restart.
User questions about 3LVF-623.1 FAGOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual 3LVF-623.1 - FAGOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3LVF-623.1 by FAGOR.
USER MANUAL 3LVF-623.1 FAGOR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FAGOR
Model : 3LVF-623.1
Category : Dishwasher