FAGOR

3LVF-422IT - Dishwasher FAGOR - Free user manual and instructions

Find the device manual for free 3LVF-422IT FAGOR in PDF.

📄 141 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice FAGOR 3LVF-422IT - page 96
View the manual : English EN Español ES Português PT
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Built-in Dishwasher
Brand Fagor
Model 3LVF-422IT
Dimensions (H x W x D) 85 cm x 60 cm x 60 cm
Weight Approx. 50 kg
Power Supply 220-240 V, 50 Hz
Rated Power 1900 W
Water Consumption per Cycle 12 L
Noise Level 49 dB(A)
Place Settings 14
Programs Eco, Intensive, Normal, Quick, Glass
Features Delay start, Half load, Salt and rinse aid indicators
Safety Child lock, Anti-flood system
Maintenance Clean filter, Check spray arms, Descaling
Spare Parts Filters, Spray arms, Rack wheels, Salt cap
Repairability Index 7.0 / 10
User Manual Free PDF download available

Frequently Asked Questions - 3LVF-422IT FAGOR

How do I install the Fagor 3LVF-422IT dishwasher?
Ensure the cutout dimensions match (85x60x60 cm). Connect to water supply (hot or cold, max 60°C), drain hose to sink, and power to a grounded outlet. Level the appliance with adjustable feet.
What are the available washing programs?
The dishwasher offers Eco, Intensive, Normal, Quick, and Glass programs. Select based on soil level and dish type.
How do I clean the filter?
Turn off the dishwasher. Remove the lower rack, unscrew the filter assembly, rinse under running water, and scrub with a soft brush. Reassemble and ensure it is locked.
Why is my dishwasher not draining?
Check the drain hose for kinks or blockages. Clean the filter and ensure the sink drain is not clogged. If the problem persists, the drain pump may need servicing.
How much salt and rinse aid should I use?
Fill the salt reservoir with dishwasher salt (approx. 1 kg) and adjust the dosage (1-6) based on water hardness. Fill rinse aid dispenser until the indicator turns clear; adjust dial (1-6) for drying performance.
What do the error codes mean?
Common codes: E1 (water inlet issue), E3 (drain problem), E4 (water leak), E5 (heater failure). Refer to the manual for full list and troubleshooting steps.
Can I use regular dish soap?
No, use only dishwasher detergent (powder, gel, or tablets). Regular dish soap causes excessive suds and may damage the machine.
How to enable energy-saving settings?
Use the Eco program which uses lower temperature and less water. Activate half load for smaller loads. The delay start feature can run during off-peak hours.
How to load dishes for best cleaning?
Place plates, bowls, and pots facing down in lower rack. Glasses and cups upside down in upper rack. Ensure spray arms can rotate freely. Use cutlery basket with handles down.
Why is the dishwasher noisy?
Noise can be from spray arms hitting items, loose cutlery, or worn bearings. Check load arrangement and ensure no items protrude. If noise persists, contact service.

User questions about 3LVF-422IT FAGOR

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Dishwasher in PDF format for free! Find your manual 3LVF-422IT - FAGOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3LVF-422IT by FAGOR.

USER MANUAL 3LVF-422IT FAGOR

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : FAGOR

Model : 3LVF-422IT

Category : Dishwasher